Silverspud
Member Since: November 22, 2010
Country: United States
-
Replacement for RFduino will be available shortly, according to manufacturer; However, it still needs more time to become useful unless you are on an iPhone
-
I should have RTFQ before commenting - - - silly me
-
In a future product could you consider expanding the usability by upgrading to the SI4737-------40 chip to include AM/FM reception.
-
Is there any hope for the SI4736-39 series to allow adding Weather Radio to the above abilities?
-
An additional Breakout using the Si 4736/47 to make weather radio available would be a step in the right direction.
-
Take it from a real OLD timer, Gramps is probably leaving because Grams is arriving.
Good luck old timer. -
I have found securing the board with a bit of tape, hemostat, or card holder to prevent movement will relieve a good deal of frustration.
I have learned, through many years of soldering, the prudence of applying a bit of solder to the tip of the iron before returning it to the stand. The solder will oxidize instead of the iron tip to be easily removed by the wet sponge. An oxidized tip will produce much grief when soldering.
Finally, clean leads of the parts to be soldered with a good grade of alcohol and the solder will flow fully into the joint. (rubbing alcohol is bad stuff).
Enjoy. -
Lots of broken links on this tutorial.
-
The Page 2 link is broken.<br />
No public wish lists :(