Niz
Member Since: January 2, 2011
Country: United States
-
I wonder how well the battery is held with this kinda holder. Does it slip out easily?
-
These young people should be in school instead of earning bits by mindlessly producing goods like these. Without education, a lifetime of low income and drudgery is almost guaranteed.
-
You don't actually need a stencil to put the paste on, for small number of PCBs (1 or 2) you can check out a simpler alternative by using a syringe on this website:
https://sites.google.com/site/undergroundengineerer/projects/practical-hobby-reflow-solder -
Hi, I have a 1"x 1" small PCB that does 6 degrees of freedom on batch PCB.
http://batchpcb.com/index.php/Products/51805
I2C interface
total BOM < $25 -
Hi, I have a 1"x 1" small PCB that does 6 degrees of freedom on batch PCB.
http://batchpcb.com/index.php/Products/51805
I2C interface -
Hi, I have a 1"x 1" small PCB that does 6 degrees of freedom on batch PCB.
http://batchpcb.com/index.php/Products/51805
I2C interface -
Hi, I have some ideas about selling one of my designs. Where and how should I contact?
-
I did a very similar project but with less modification to the oven.
I posted photos and video on reflow soldering using a cheap oven here:
https://sites.google.com/site/undergroundengineerer/projects/practical-hobby-reflow-solder -
You can just use rubbing alcohol. Works very well for me. I got some from 91% isopropyl alcohol from Walmart (around $2) and it works great.
No public wish lists :(