JSchultz
Member Since: March 3, 2011
Country: United States
-
I believe the length dimension listed is wrong :)
-
This cable worked like a charm on my Cypress PSOC-5 evaluation board. Up and running in 1 min. Now able to send Rx and Tx commands like a champ.
To note: Rx relative on the "FTDI Cable Schematic", means the Tx on the micro controller. Tx on the "FTDI Cable Schematic" means Rx on the micro controller. (You probably know this, but I have had "fun" learning serial ports :))
Like mentioned below, I'm interested in seeing the cable being able to handle loads larger than 70mA. I have personally tested this cable to 70mA as well and will hopefully soon test it to higher values.
No public wish lists :(