Nathan Johnson
Member Since: September 21, 2013
Country: United States
-
Okay, great, thank you for all of your help!
-
Awesome!
Sorry for all these questions but just one final question: do I cut off the male connectors on the wires and then put them in the screw terminals on the DC barrel jack and then connect the female connectors on the wires to the board's servo power pins?
-
Thanks a lot, I'll do it that way then with that adapter. I can't find male to female jumper wires here on SparkFun though... do you guys sell jumper wires?
-
Would this one work? https://www.sparkfun.com/products/8269 Also, how do power adapters plug into the board? I know it can plug into a barrel jack but I don't know where it would go on the Micro Maestro.
-
Okay, thanks Toni.
-
Which power adapter should I use to plug into this board when one or two servos (this servo: https://www.sparkfun.com/products/11883) will be plugged into it? I'm very new to this kind of stuff and I don't want to ruin the servo so any help/suggestions are greatly appreciated.
-
Alright, thanks.
-
Is the USB slot on this controller Mini USB or Micro USB?
No public wish lists :(