by ROB-24601
Here's the list of parts to make the Visual Indicator Electronic Warning System (VIEW System - I just made that up. What can I say, we like our acronyms here). I threw some 330Ω resistors in as well, so you don't burn out the LEDs. This will give you one complete build, so to do five, you'll need to increase the numbers of most products. (Of course, not the resistors. Also, things like jumper wires and LEDs, you'd probably only need one more of, since they're multi packs. You also won't need another USB cable.)
Product | Subtotal | Qty | |
---|---|---|---|
Infrared Proximity Sensor Long Range - Sharp GP2Y0A02YK0F
SEN-08958 |
16.5 |
1
Cannot be ordered at this time. |
|
SparkFun RedBoard - Programmed with Arduino
DEV-13975 |
21.5 | 1 | |
LED Rainbow Pack - 5mm PTH
COM-12903 |
3.95 |
1
Cannot be ordered at this time. |
|
Breadboard - Self-Adhesive (White)
PRT-12002 |
5.5 | 1 | |
Jumper Wires - Connected 6" (M/M, 20 pack)
PRT-12795 |
2.1 | 1 | |
SparkFun USB Mini-B Cable - 6 Foot
CAB-11301 |
4.5 | 1 | |
9V Battery Holder
PRT-10512 |
3.5 | 1 | |
Battery Holder - 4xAA to Barrel Jack Connector
PRT-09835 |
2.75 | 1 | |
Resistor 330 Ohm 1/6 Watt PTH - 20 pack
COM-11507 |
0.95 |
1
Cannot be ordered at this time. |
|
Total: 61.25 |