by bboyho
Based off Nate's tutorial on making your own Mixed Signal Costume [https://www.sparkfun.com/tutorials/205], here is the a list of the major components that you would need to get to make ONE of the customs. This assumes that you have wire and solder already. To make two, just multiply everything by two. There are still a few components that would need to get that is not sold from our site, just check out the tutorial for more information on those parts.
You would need a 3.3V FTDI [https://www.sparkfun.com/products/9873] and a miniB USB Cable [https://www.sparkfun.com/products/11301] to program each 3.3V pro mini if you don't have one already. For the XBee, you can use the XBee Explorer USB [https://www.sparkfun.com/products/8687]. It's need to program each XBee module.
Product | Subtotal | Qty | |
---|---|---|---|
Polymer Lithium Ion Battery - 6Ah
PRT-08484 |
32.95 |
1
Cannot be ordered at this time. |
|
XBee 1mW Wire Antenna - Series 1 (802.15.4)
WRL-08665 |
24.95 |
1
Cannot be ordered at this time. |
|
SparkFun XBee Explorer Regulated
WRL-11373 |
11.95 | 1 | |
Arduino Pro Mini 328 - 3.3V/8MHz
DEV-11114 |
10.95 | 1 | |
LED - Super Bright Yellow (25 pack)
COM-10023 |
8.5 |
1
Cannot be ordered at this time. |
|
LED - Super Bright Green (25 pack)
COM-09661 |
8.5 | 1 | |
LED - Super Bright Red (25 pack)
COM-09660 |
2.13
You save: 6.37 (75%) |
1 | |
JST Jumper 2 Wire Assembly
PRT-09914 |
5.25 | 5 | |
N-Channel MOSFET 60V 30A
COM-10213 |
3.75 |
3
Cannot be ordered at this time. |
|
Trimpot 10K Ohm with Knob
COM-09806 |
1.05 | 1 | |
ProtoBoard - Square 1" Single Sided
PRT-08808 |
1.95 | 1 | |
LED - Super Bright Green
COM-08285 |
3.15 | 3 | |
LED - Super Bright Red
COM-00528 |
3.15 | 3 | |
LED - Super Bright Yellow
COM-00530 |
3.15 | 3 | |
Total: 121.38 |