This is the 3.5" Raspberry Pi Primary Display Cape, a small touch-sensitive screen that attaches directly onto your Raspberry…
Most widgets could benefit from a shiny touchscreen interface. Unfortunately, it's usually not easy to hook up a touchscreen …
The μLCD43(GFX) is an intelligent graphics display that harnesses the power of Active Matrix LCD (TFT) technology to deliver…
The 7.0” resistive touch LCD touch from 4D Systems is a cape specifically designed for the Beaglebone Black, and provides a…
This is the 3.2" Raspberry Pi Primary Display Cape, a small touch-sensitive screen that attaches directly onto your Raspberry…
This display module from 4D systems is the uLCD-70DT, a 7.0” intelligent touchscreen LCD powered by the DIABLO16 graphics p…
The microUSB Programming Adapter (μUSB-PA5) is a USB to Serial-TTL UART bridge converter which is very small and easy to use…
Did you get your hands on a Raspberry Pi and need a little monitor to complete your tiny desktop computer? Or maybe you just …
The 4.3” resistive touch LCD touch from 4D Systems is a cape specifically designed for the Beaglebone Black, and provides a…
The µLCD-32PTU is a compact Intelligent Display Module from 4D Systems packed with plenty of features, ready to become the G…
The µLCD-144-G2(GFX) is a compact and cost effective display module using the latest state of the art LCD (TFT) technology w…
The µOLED-160-G2 is a compact display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with …
The µOLED-128-G2 is a compact display module from 4D Systems using the latest state of the art Passive Matrix OLED (PMOLED) …
The uOLED-96-G2(GFX) is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PM…
The μVGA-III module is a compact and cost effective standalone VGA graphics engine powered by the PICASO graphics processor.…
These are original Sharp color TFT-LCDs designed to be used in the PlayStation Portable. 4.3" of beautiful 24-bit color with …
**Description**: This is the SMD connector for the PSP touch screen. 4-pin right angle good, friction fit connector with 1 mm…
This is the ZIF connector for the PSP LCD. 0.5mm pitch means you'll have to be a bit experienced with soldering. **Note:**…
This is the itty-bitty connector for the Nokia color LCD. 10-Pins. Surface mount. Hard to find. 0.5mm pitch so be careful. …
This is a base board for the PICASO graphics controller. RS232 level translation and a socket for the PICASO module are all i…