Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Mon-Fri, 9am to 12pm and 1pm to 5pm U.S. Mountain Time:
(303) 284-0979
Chat With Us
Jump to Subcategory:
added to your cart!
This is the 915MHz base RFM69HCW Wireless Transceiver that is found on our RFM69 Breakout. The RFM69HCW is an inexpensive and…
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for IoT or WiF…
The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for IoT or W…
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+. This transceiver IC operates in the …
This tri-band GNSS antenna is ideal for GPS L1, GLONASS L1, and Beidou B2 reception.
The RockBLOCK External Patch Antenna is a high-performance magnetic mount antenna designed specifically to communicate effici…
The SparkFun ESP8266 Thing Dev Board is a development board that has been solely designed around the ESP8266, with an integra…
This is an XBee module with a PCB Antenna. You also get a built in microcontroller so it can be programmed using MicroPython …
The nRF24L01 module is the latest in RF modules from SparkFun. This module uses the 2.4GHz transceiver from Nordic Semiconduc…
The SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other…
This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as w…
The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development.
The Raspberry Pi Zero W can be a bit tricky to set up with its unique power and cable requirements. That's where this kit com…
This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. **Note:** This breakout boar…
The SparkFun IoT Starter Kit with Blynk Board is a great way to gain a solid introduction to the world of IoT technology with…
The SparkFun ESP8266 Thing Dev Board with Headers is a dev board that has been designed around the ESP8266, with an integrate…
The SparkFun WiFi IR Blaster is designed to connect all of those old, legacy IR-controlled devices to a WiFi network exposing…
This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from…
Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected…
2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedan…
The LimeSDR Mini development board is a hardware platform for developing and prototyping high-performance and logic-intensive…
This is a fantastic find for SFE. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Specificat…
This is an XBee Pro module with an RP-SMA connector. You also get a built in microcontroller so it can be programmed using Mi…
These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcon…
The Arduino Uno WiFi R2 is an Arduino Uno with an integrated ESP32 u-blox NINA-W13 WiFi module.
The Microsoft Azure IoT Starter Kit for the SparkFun Thing Development Board has been designed to help you seamlessly connect…
The EM-506 GPS receiver from [USGlobalSat](http://www.usglobalsat.com) based on the spectacular SiRF StarIII chipset. This co…
Commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna.
This is an XBee Pro package with a PCB Antenna. You also get a built in microcontroller so it can be programmed using MicroPy…
The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system …
This is a four-pack of omni-directional antennas and cables that have been assembled to be specifically used with the LimeSDR…
The LoPy4 is a compact quadruple network MicroPython enabled development board. It’s the perfect enterprise grade IoT platf…
The SparkFun ESP32 DMX to LED Shield is the perfect way to send and receive DMX data whether it's coming in or out over the o…
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries.
A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside…
This is the 434MHz base RFM69HCW Wireless Transceiver that is found on our RFM69 Breakout. The RFM69HCW is an inexpensive and…
These wireless transmitters work with our 434MHz receivers. They can easily fit into a breadboard and work well with microcon…
The Particle Xenon is a low-cost mesh-enabled development board.
This universal Antenna Kit can also be used with LoPy, SiPy, LoPy4, and FiPy IoT development boards to talk over LoRa and Sig…
The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W. This ki…
The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for th…
The Electron is a tiny development kit for creating 3G cellular-connected electronics projects and products. It comes with a …
900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance…
Want to improve your GPS antenna multipath convergence time performance to near survey-grade GNSS levels? Just using this sim…
The Omega2+ IoT computer is Onion’s top-end Linux-based WiFi development board designed to enable makers of all skill level…
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance…
The YARD Stick One SDR from Great Scott Gadgets is a sub-1 GHz wireless test tool controlled by your computer.
