Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
The Teensy 3.6 is larger, faster and capable of more complex projects, especially with its onboard micro SD card port, ARM Co…
The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ with 32GB of eMMC Flash memory.
added to your cart!
MIKROE Flash Click is 8,388,608 bits (8 Mbit) on a Click board™, organized into 1,048,576 bytes (1 MB).
The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ with 8GB of eMMC Flash memory.
The Teensy 3.2 is a breadboard-friendly development board with loads of features in a, well, teensy package.
MIKROE FTDI Click features FT2232H - dual high speed USB 2.0 to UART/I2C/SPI serial interface converter.
EVE Click is a display controller board in mikroBUS™ form factor.
The 8GB Raspberry Pi 4 features the ability to run two 4k resolution monitors, to run true Gigabit Ethernet operations, all a…
CAN FD 2 Click is a HS CAN transceiver add on board, suitable for evaluation of TLE9255W CAN network transceiver from Infineo…
The Flash 6 Click based on W25Q128JV (128M-bit) flash memory from Winbond provides a storage solution for systems with limite…
MIKROE Fiber Opt Click is a compact and easy solution for adding fiber-optic communication to your design.
The Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded…
MIKROE DAC 10 Click is a compact add-on board that contains a fully-featured, highly accurate digital-to-analog converter.
MIKROE SQI FLASH Click is based on the SST26VF064B, a 64 Mbit Serial Quad I/O flash device from Microchip.
Opto 2 Click uses four TLP2770, 20Mbps low-power optocouplers, from Toshiba.
LEM Click carries the LTS 6-NP current transducer and MCP3201 ADC converter.
The SparkFun MicroMod Single Pair Ethernet Kit demonstrates 10BASE-T1L Two-Wire Ethernet protocol into the SparkFun MicroMod …
RS485 6 Click offers a half-duplex RS-485 communication with integrated surge protection.
XPRO-Adapter Click is an adapter board for connecting Microchip Xplaned Pro expansion boards with hundreds of mikroBUS™ bas…
MIKROE SRAM Click lets you add 1 Mbit of additional SRAM memory to your devices, via the 23LC1024 chip.
MIKROE mikroProg for STM32 is a fast USB 2.0 programmer and hardware debugger based on ST-LINK v2.
AN to PWM Click is a device that converts an analog voltage input signal into a pulse width modulated (PWM) output signal.
MIKROE nvSRAM Click is a compact add-on board that contains the most reliable nonvolatile memory.
R Meter Click is a mikroBUS add-on board with circuitry for measuring the value of resistors.
MIKROE ATA663254 Click is a fully integrated LIN transceiver device with an integrated 5V LDO voltage regulator.
MCP2518FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
SPI Isolator 6 Click is a compact add-on board representing a digital isolator optimized for a serial peripheral interface.
A5000 Plug&Trust Click is a compact add-on board representing a ready-to-use secure IoT authenticator.
I2C Extend Click is a compact add-on board for applications that require extending the I2C communication bus over a long dist…
ADC 16 Click is a compact add-on board that contains a high-performance data converter.
The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move fro…
USB UART Click carries the FT232RL, a USB to UART interface IC, from FTDI.
The NVIDIA® Jetson Nano™ 2GB Developer Kit delivers the performance to run modern AI workloads at a small form factor, low…
MIKROE FRAM 6 Click is a compact add-on board that contains highly reliable ferroelectric random access memory.
DAC 4 Click carries Microchip’s MCP4728 IC, a Quad Digital-to-Analog Converter with nonvolatile (EEPROM) Memory.
EXPAND 7 Click is a compact add-on board that contains a multi-port I/O expander with bi-directional input/outputs or PWM out…
MIKROE Arduino Uno Click shield is an extension for Arduino Uno and any other Arduino-compatible board.
RNG Click is a random number generator (RNG), a device that generates a sequence of numbers or symbols that cannot be reasona…
ADC 11 Click is a compact add-on board that contains a high-performance data converter.
Terminal 2 Click is an adapter Click board™ used as a mikroBUS™ socket expansion board.
MIKROE SRAM 4 Click is a compact add-on board that contains highly reliable nonvolatile memory.
Have some fun coding your very own AI robot with TJBot, a do-it-yourself template to learn, experiment with and explore AI wi…
The Raspberry Pi 3 B+ is here to provide you with the same Pi as before, but now with gigabit and PoE capable Ethernet!
Secure 5 Click includes the ATECC508A, a secure CryptoAuthentication™ device from Microchip.
The main component of the Hz to V Click is the TC9400, a voltage-to-frequency and frequency-to-voltage converter from Microch…
SolidSwitch 3 Click is a compact add-on board that contains a load switching device.
The Compute Module 3+ Development Kit is made for developing industrial applications with CM3+, CM3+/Lite, CM3, CM3 Lite, and…