Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The XRP Robotics Platform is a hands-on, comprehensive robotics platform and includes everything needed to build and program …
At the heart of the Experiential Robotics Platform (XRP) lies the powerful yet easy-to-use XRP Controller Board, the brains o…
These are basic nylon plastic casters with a 1" diameter.
These rubber O-rings have an outer diameter of 55mm, inner diameter of 45mm and wire diameter of 5mm.
The motor requires a voltage between 4.5-9V, has a gearbox ratio of 1:48 and a speed of 140RPM at 4.5V.
A line follower sensor gives your robot the ability to detect lines or nearby objects.
This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V) with a 18…
With this XRP Chassis you can unleash your robotic creativity and 3D-printed foundation used in the popular XRP Kit.
This 210 piece brass standoff kit insures you'll always have a set handy.
These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw.
The SparkFun IoT Brushless Motor Driver is a powerful WiFi & BLE capable motor driver that can control any 3-phase BLDC motor…
This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integr…
The TMC6300 from Trinamic is a powerful, yet easy to use three-phase brushless DC (BLDC) motor driver.
The compact Simply Servo board for Raspberry Pi Pico allows for up to 8 servos to be controlled simultaneously.
Vibration ERM Motor 10K RPM represents a compact-size Eccentric Rotating Mass (ERM) motor designed by Vybronics.
A compact metal magnetic antenna mount.
This is an M3 Hex nut for use with M3 screws.
These gearmotors require a voltage of 4.5V with a no load current of 190mA while possessing a gearbox ratio of 48:1.
Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per channel using the TB6612.
A 3-phase DC brushless DC motor has the unique capability of being both a high efficiency, high torque, very smooth motor, a…
The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), …
The Kitronik Autonomous Robotics Platform for Raspberry Pi Pico is a fun and hands-on introduction to buggy robotics.
This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections.
This servo cable has a shrouded male servo connector on one end, and 3x breadboard hookup pigtails at the other end.
The Mates Stand offers a simple connection for a MatesBUS compatible device, such as the TIMI-96.
A 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.
The 12V Electric Marine Submersible non-automatic 500GPH bilge pumps from SEAFLO offer water evacuation activated by a panel …
The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 30…
Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi P…
The SparkFun Qwiic Motor Driver Kit gives you the basic parts needed to start up quickly with a motor driven project with our…
A sturdy pan-tilt mechanism for most of the cameras that are used with microcontrollers.
The Build HAT allows you to control LEGO® Technic™ devices with your favorite Raspberry Pi.
The PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. Weighing…
Utilize this kit to turn your Jetson Nano into a mobile machine with things like object following, collision avoidance via th…
The Otto DIY Builder is the perfect STEM+A robot kit for parenting or school education and includes everything you need to ru…
The Otto DIY Maker is the perfect STEM+A robot kit for parenting or school education and includes what you need to run a STEM…
Here, for all your mechatronic needs, is a simple, 120° rotation analog servo motor.
The Qwiic Haptic Motor Driver includes an itty-bitty, Linear Resonant Actuator (LRA) vibration motor and DialogSemi's DA7280 …
The Qwiic Haptic Motor Driver Kit includes a small LRA vibration motor, wires, and the breakout board for Dialog Semi's DA728…
Engineering Just Got Cool with the Arduino Engineering Kit! Bring the power of the Arduino MKR1000 to the classroom with MATL…
The JetBot Chassis Kit V2 is the official chassis used on the SparkFun JetBot AI Kit but can be used for many different robot…
"Rubber" feet raise your PCB or project up off your desk.
This hardware kit consists of four each of M2 style nylon hex nuts and screws.
The ProDriver makes it easy to start developing with the Toshiba TC78H670FTG bipolar stepper motor driver IC.
The :MOVE mini MK2 Buggy Kit from Kitronik provides a fun introduction to robotics using the micro:bit.
This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V.
The Auto pHAT is an all in one package that focuses on quickly adding robot functionality and advanced support to your Raspbe…
Combining the micro:bit with the SparkFun moto:bit carrier board creates a flexible, low-cost, Qwiic-enabled robotics platfor…
The SparkFun Qwiic Motor Driver takes all the features of the Serial Controlled Motor Driver and miniaturizes them, adding Qw…
The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward manne…
Does controlling door access with the power of Electromagnetism interest you? Great! In effect, this latch / lock solenoid is…
This is a simple ~140RPM (no load), DC planetary gearmotor.
The BeagleBone Blue is the affordable and complete robotics controller built around the popular BeagleBone open hardware comp…
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deli…
Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver. This board breaks out Te…
Have some fun coding your very own AI robot with TJBot, a do-it-yourself template to learn, experiment with and explore AI wi…
Control up to two DC motor outputs at a constant current of 1.2A. Utilize up to two input signals and four function modes: CW…
Turning off backorders - supply of main IC is delayed until July 2022.
This is an easy-to-assemble pan/tilt bracket kit that utilizes servos to move on two axes fit for camera and helping-hand app…
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino…
The Ardumoto Shield is a dual-motor controller for Arduino. Based on the L298 H-bridge, the SparkFun Ardumoto can drive two D…
Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get yo…
The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo m…
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V or 0 to 3.…
Stepper motors are great motors for position control. They can be found in desktop printers, plotters, 3d printers, CNC milli…
The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital …
The SparkFun Inventor’s Kit for RedBot is a great way to get started with two motor robotics and sensor integration using t…
These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis …
The Shadow Chassis is a marvelously durable and modular robot platform from RobotZone. The chassis plates and mounts are cut …
The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external s…
No, this isn't a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasten…
These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs rig…
These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chas…
The Big Easy Driver, designed by [Brian Schmalz](http://www.schmalzhaus.com/), is a stepper motor driver board for bi-polar s…
This is the Hobby Motor and Encoder Kit from DAGU, an inexpensive and reliable set of add-ons for your next robotic project. …
These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic …
This is the Micro Gripper Kit B, a simple robotics kit that is great for "getting a grip" on smaller robotics projects! Desig…
This is the Micro Gripper Kit A, a simple robotics kit that is great for "getting a grip" on smaller robotics projects! Desig…
This is a 12 wire slip ring, a remarkably simple electromechanical assembly that allows electronic signals to be passed throu…
This is a 6 wire slip ring, a remarkably simple electromechanical assembly that allows electronic signals to be passed throug…
This is a 3 wire slip ring, a remarkably simple electromechanical assembly that allows for electronic signals and power to be…
The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver…
These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision …
This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when so…
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring …
This 0.012" Flexinol® Actuator Wires (aka shape memory [Nitinol](http://en.wikipedia.org/wiki/Nickel_titanium)) is a one foo…
These 8" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". …
These 2" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When us…
These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system or motorized …
These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 50:1 and operate up to 12…
These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter l…
These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12…
These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 298:1 and operate up to 1…
These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing …
These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". Wh…
These 10" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06".…
These 10" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". Whe…
These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 150:1 and operate up to 1…
These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system. The idler A …
These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing …
These enclosures allow you to mount your micro gearmotor to other [Actobotics](https://www.sparkfun.com/pages/Actobotics) pro…
This is the Wheel Encoder Kit from DAGU, a simple add-on to any wheeled robot that can help measure the speed or distance the…
This 0.005" Muscle Wire® (aka shape memory [Nitinol](http://en.wikipedia.org/wiki/Nickel_titanium)) is a one foot long piece…
This 0.012" Muscle Wire® (aka shape memory [Nitinol](http://en.wikipedia.org/wiki/Nickel_titanium)) is a one foot long piece…
The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. Th…
Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and delive…
This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works w…
The HS-85MG is able to take in 6 volts and deliver 49 oz-in. of maximum torque at 0.14sec/60°, and this guy is only about th…
This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of m…
This is the versatile Hitec HS-425BB servo. This little guy is able to take in 6 volts and deliver 57 oz-in. of maximum torqu…
This beast is the Hitec HS-805BB servo. Able to take in 6 volts and deliver an impressive 343 oz-in. of maximum torque at 0.1…
These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solen…
These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along th…
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. This is …
These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Whe…
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating …
We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and i…
Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the …
Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. …
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. According to the d…
There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use …
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here'…
Do you have some liquids that you need to move? This fluid pump will move 350 gallons per hour! The SEAFLO mini water pump ha…
This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to …
This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism usin…
These nylon standoffs are 3/8" long and tapped for a 4-40 screw.
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take i…
These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 9…
The universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold …
This is a breakout board for the [L298N](http://www.sparkfun.com/commerce/product_info.php?products_id=9479) full-bridge dual…
The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and dri…
This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a [Bipolar](http://en.wikipedia.o…
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifi…
These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 …
**Description**: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed be…
A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of app…
