Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
MIKROE mikroProg for STM32 is a fast USB 2.0 programmer and hardware debugger based on ST-LINK v2.
MIKROE CODEGRIP for STM32 is a fast USB-C and WiFi programmer and hardware debugger that supports STM32 Cortex M0, M3, M4, an…
A universal programmer and debugger for ARM® Cortex®-M, RISC-V, PIC®, dsPIC, PIC32, and AVR over USB-C.
**Replacement:** None. We are no longer stocking these programmers. This page is for reference only. The PIC-PG3B is a power…
Compact J-Link programmer for programming any ARM microconroller.
**Replacement:**[CAB-11304](https://www.sparkfun.com/products/11304). We're now carrying a new, more reliable USB to RS232 Co…
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and…
Used for programming, this cable allows the PICAXE to be connected to any computer with a serial port. The folks at PICAXE ha…
**Replacement:** None. We don't carry a direct replacement for this programmer, but check out our other [programming tools](h…
**Replacement:** None. We are no longer carrying this programmer. This page is for reference only. **Description**: The late…
**Replacement:** None. We are no longer carrying this programmer, but check out our [programmers](http://www.sparkfun.com/cat…
AVR-PG1B is programmer based on serial port PonyProg design. It takes the power supply from the *target* board. The connector…
The PICAXE USB programmer allows PICAXE micros to be programmed from any platform (Windows and Linux). The programmer uses th…
**Replacement: **None. There is no direct replacement for this programmer. It was retired due to poor sales. This page is for…
**Replacement:** None. There is no direct replacement for this programmer. This page is for reference only. JTAG programmer …
**Replacement:** None. We are no longer carrying this product. This page is for reference only. AVR-JTAG is the new In Circu…
JTAG programmer for the MAXQ processor with USB interface. This unit has a female USB 'A' connector on it which means you wil…
**Replacement:** None. There is no direct replacement for this product, however we do carry a wide selection of programmers i…
**Replacement:** None. We don't carry a replacement for this part but check out our other [programmers](http://www.sparkfun.c…
**Replacement:** None. We do not have a direct replacement for this programmer. This page is for reference only. Low cost US…
**Replacement:** None. We're no longer selling this programmer but check out our [programmers](http://www.sparkfun.com/catego…
**Replacement:** None. We are no longer carrying this LPC interface in our catalog. This page is for reference only. This is…
**Replacement:** None. We are no longer carrying this adapter in our catalog. This page is for reference only. This is an ad…
**Replacement:** None. We are no longer carrying this programmer, but have a look at our other [PIC programmers](http://www.s…
LinkM is a USB adapter that addresses two of the most frequently-requested BlinkM features. It enables you to program BlinkMs…
**Replacement:** None. There is no direct replacement but you might want to check out [this programmer](http://www.sparkfun.c…
**Replacement:** None. We do not have a direct replacement for this programmer. Check [here](http://www.sparkfun.com/categori…
**Replacement:** None. We do not have a direct replacement for this programmer. This page is for reference only. This is a v…
**Replacement:**[PGM-11801](https://www.sparkfun.com/products/11801). The Tiny AVR Programmer has gotten a few improvements i…
**Replacement:** None. We are no longer carrying this programmer. This page is for reference only. MSP430-JTAG connects via …
**Replacement:**[PGM-09825](http://www.sparkfun.com/products/9825). The new version uses an SMD 5x2 header instead of a throu…
**Replacement:** None. We are no longer carrying this product in our catalog. This page is for reference only. AVR-USB-JTAG …
**Replacement:** None. Unfortuantely, this guy is a little past its prime. Due to slow sales and just being old, we've decide…
The AST-CAN485 I/O Shield allows you to interface the AST-CAN485 Dev Board with 24V inputs and outputs, expanding its usefuln…
**Replacement:** None. We no longer carry this programmer but have a look at the rest of our [programmers](http://www.sparkfu…
Fast programming, increased functionality, at the same price as its predecessor, the PICkit™ 3. The MPLAB PICkit 4 now h…
Tiny J-Link programmer for programming any ARM microconroller. Comes with an educational/ non-commercial license.
MicroView, essentially an Arduino with a built-in display, is a tiny, enclosed piece of technology used to create a large ass…
The KTA-223 Relay Board is a USB or RS485 controlled module that can interface a PC to eight or more SPDT relays. This could …
The microUSB Programming Adapter (μUSB-PA5) is a USB to Serial-TTL UART bridge converter which is very small and easy to use…
This MIKROE 50-100mil Adapter allows you to connect a mikroProg for STM32 programmer and hardware debugger to a Cortex debug …
If you're looking to play with PICAXE microcontrollers on a computer with only USB, look no further! The PICAXE USB programmi…
Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attac…
The SparkFun Pi AVR Programmer HAT makes it easy to program AVRs directly from the SPI hardware pins on any Raspberry Pi.
Our friends over at LinkSprite have made this nifty little RS485 Shield V3 for the Raspberry Pi, now you will be able to have…
The microUSB Programming Adapter (μUSB-PA5-II) is a USB to Serial-TTL UART bridge converter which is very small and easy to …