Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
This is a breakout board for Nordic's nRF24LU1+ system-on-chip wireless transceiver. The nRF24LU1+ features a fully integrate…
WiFi NINA Click is a powerful standalone WiFi module, equipped with the state-of-the-art NINA-W132 module from u-blox.
MIKROE NFC 4 Click is a compact add-on board that contains an NFC transceiver for contactless communication.
**Replacement:**[WRL-10268](https://www.sparkfun.com/products/10268). The latest revision of this board breaks out the PIO4 p…
**Replacement:**[WRL-11664](https://www.sparkfun.com/products/11664). This module has been replaced with a newer version! Thi…
Replacement: None. Unfortunately, this module is no longer being produced so we can no longer carry it in our catalog. This p…
The Mi-Light LED Controller Box is a 2.4GHz RF LED accessory that enables your non-addressable LED strips to change color, di…
If you aren't familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware …
Xbee radios are an awesome way to add wireless capability to your Arduino project and now it's even easier with the XBee Shie…
LR 5 Click is a compact add-on board that contains a long-range transceiver.
Magnet mount antenna for GPS modules operating at 3V. Designed for used with automobiles - the magnet will hold the antenna i…
**Replacement:**[WRL-12770](https://www.sparkfun.com/products/12770). The new rev of the RFM12B is now available and is funct…
**Replacement:** None. We are no longer carrying these connectors. This page is for reference only. These are the 1.25mm pit…
LTE IoT 4 Click is a compact add-on board that contains an IoT module with worldwide coverage.
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pret…
EnOcean 3 Click carries an ultra-low power TCM515 transceiver gateway module which operates at 868MHz radio band.
The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It…
FT Click is a compact smart transceiver add-on board that helps you add a Free Topology (FT) interface to any host board with…
This 6-conductor ribbon cable mates with the connector on the bottom of the GP-2106 GPS module.
**Replacement:**[WRL-11373](https://www.sparkfun.com/products/11373). The latest revision replaces the diode level shifter wi…
**Replacement:** None. We're no longer building this board but check out our [GPS evaluation boards](https://www.sparkfun.com…
4G LTE Click is an LTE Cat 1 multimode cellular network solution, featuring the compact LARA-R2 series modem from u-blox.
**Replacement:**[WRL-12580](https://www.sparkfun.com/products/12580). The firmware on this Roving Networks product has been u…
**Replacement:** None. We are no longer carrying the ConnectPort X2 in our catalog. This page is for reference only. Connect…
This is the same product as the [WiFly Shield](https://www.sparkfun.com/products/9954). The difference is this version comes …
**Replacement:**[WRL-11216](https://www.sparkfun.com/products/11216). The new version of this unit ships with a PCB trace ant…
Vertical 10 pin SMD connector for the GS406 GPS module.
**Replacement:** None. We are no longer carrying this product. This page is for reference only. This board from DIYDrones fe…
**Description**: The LS20031 GPS receiver is a complete 10Hz GPS smart antenna receiver, that includes an embedded antenna an…
This is a basic RPSMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and h…
There’s a lot of Raspberry Pi information going around lately. Whether it’s Pi A, A+, B, B+, or Pi 2 B, any forum will ha…
Enable your next embedded project with FM broadcast ability. This small module packs some power. With a 2mW maximum broadcast…
WiFi 2 Click features the HLK-M30 WiFi module with a built-in TCP/IP protocol stack.
These are the nRF2401A 2.4GHz transceiver modules with built in chip antenna designed around the Nordic Semiconductor nRF2401…
**Replacement:** None. We don't carry a direct replacement for this module, but have a look at our [cellular category](https:…
GNSS 2 Click carries Quectel’s L76 module and an SMA antenna connector.
433MHz Long Range Radio from HAC. These small modems use a seamless serial interface - whatever enters the TX pin at 9600bps …
**Replacement:**[WRL-10420](http://www.sparkfun.com/products/10420). This new version is a Series 2 which uses a much newer f…
**Replacement:** None. We don't carry a direct replacement for this part but check out our [antenna category](https://www.spa…
**Replacement:**[CEL-09427](http://www.sparkfun.com/products/9427). We are using the SM5100B module in place of the older GE8…
**Replacement:** None. While we don't carry a direct replacement for this module, have a look at our other modules in the [GP…
**Replacement:** None. We are looking for a new supplier for these, but don't have a replacement yet. This page is for refere…
**Replacement:** None. There is no direct replacement for the KinetaMap. It had a good run, but it's time to go away. We stop…
**Replacement:**[GPS-09980](http://www.sparkfun.com/commerce/product_info.php?products_id=9980). The v3 board comes with a ds…
**Replacement:**[GPS-10920](http://www.sparkfun.com/products/10920). The new version of this board is built with the Venus638…
**Replacement:** None. We are no longer building this board. This page is for reference only. This is a nicely packaged key …
The Microsoft Azure IoT Starter Kit for the SparkFun Thing Development Board has been designed to help you seamlessly connect…
