Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
This is the LilyPad revision of our [FTDI Basic](http://www.sparkfun.com/products/9716). It is the same as our other FTDI Bas…
The 5V - 7.2V heater is made to work with an off the shelf, 5V battery pack or two lipo batteries in series (just make sure b…
These are your standard 1.5V AAA alkaline batteries from Rayovac. Don't even think about trying to recharge these. Roughly 75…
The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide th…
We've all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us we…
These straight ELastoLite® connectors are perfect for making a transition from wires to conductor tape. Simply iron two wire…
These LED string lights are a great way to add light to any project with little to no soldering required. The insulated strin…
These are orange 5" x 3" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, a…
These are orange 2" x 2" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, a…
The INV135 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive 8in2 EL pan…
These are 2 inch strips of iron-on adhesive from ELastoLite® for their electroluminescent product line. Simply iron on this …
These are blue-green 2" x 2" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproo…
This is three feet of circuit tape that has been designed for the ELastoLite® electroluminescent line of products. Each pack…
Calling all fashion moguls: Here is your chance to play with the most experimental materials in 21st Century fashion! This is…
These orange ELastoLite inverter connectors are to be used in conjunction with the INV135 electroluminescent inverter for dri…
**Replacement: **None. We don't have a direct replacement for this unit but check out our [e-textiles](https://www.sparkfun.c…
Make: Wearable Electronics is intended for those with an interest in physical computing who are looking to create interfaces …
These are blue-green 5" x 3" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproo…
These are blue 2" x 2" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, and…
Have you ever been listening to music on your MP3 player and a song you don't want to listen to comes on but you don't want t…
These are green 5" x 3" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, an…
These are white 2" x 2" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, an…
While this may look like a bad toupee it's actually an ounce of fine conductive fiber that is only 8 microns thick. For a pur…
The SparkFun Paper Circuits Classroom Pack teaches the basics of creating an electric circuit to a class without the need to …
These contact patches are perfect for connecting circuit tape to ELastoLite® EL panels. Simply iron wires or ELastoLite® ci…
The SparkFun Photon Wearable Shield makes it easy to add the WiFi-enabled Photon to any wearables project. Each pin on the Ph…
Sparkle is Aniomagic's avant-garde way to make interactive textiles, paper, ceramics, and environments. These lightboards com…
This a 40cm long strip of conductive hook & loop (Velcro). This conductive strip is perfect for e-textile projects where you…
ElastoLite® is a fantastic line of flexible electroluminescent (EL) panels, inverters, and connectors that can be sewn into …
**Replacement:**[DEV-11032](https://www.sparkfun.com/products/11032). The new version of this kit comes with a fabric swatch …
Sparkle is Aniomagic's avant-garde way to make interactive textiles, paper, ceramics, and environments. They've made it so ea…
These crimp connectors can be used to terminate our 4-wire conductive ribbon. Simply insert the end of the ribbon into the co…
Conductive thread is a creative way to connect various electronics onto clothing. This thread can carry current for power and…
This a 10cm long strip of conductive hook & loop (Velcro). This conductive strip is perfect for e-textile projects where you …
This is a very thin flexible speaker with included amplifier, perfect for wearable applications where you need a little sound…
**Replacement:**[DEV-10958](https://www.sparkfun.com/products/11262). We've replaced this kit with the very nifty ProtoSnap L…
**Replacement:** None. We are no longer carrying this product, but check out the rest of our [e-textiles section](https://www…
These are blue 5" x 3" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, and…
These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest ene…
LilyPad Prototyping Stickers are a great way to lay out a project before getting out a needle and thread. They help you posit…
**Replacement:** None. We're no longer making these boards but you can still find LilyPad prototyping boards in our [e-textil…
**Replacement:**[DEV-10958](https://www.sparkfun.com/products/11262). In the new version, we've changed the labeling on the L…
**Replacement:**[KIT-11833](https://www.sparkfun.com/products/11833). We've updated this kit to include the LilyTwinkle Proto…
This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in one direction. It is hi…
The LilyPad XBee is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary powe…
This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in both directions. It is …
**Replacement:**[DEV-11262](https://www.sparkfun.com/products/11262). The new version of this board is easier to snap apart! …
This conductive ribbon is a great way to wire your e-textile projects without running hundreds of stitches all over the place…
These green ELastoLite inverter connectors are to be used in conjunction with the INV133 electroluminescent inverter for driv…
The straight 4-wire Bus has four leads that are each 0.15in wide.
These are green 2" x 2" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, an…
**Replacement:** None. There is no direct replacement for these snaps. This page is for reference only. A snap is fun, but a…
**Replacement:** None. There are no direct replacements for these boards but take a look at our [LilyPad Protoboards](http://…
**Replacement: **[DEV-09267](http://www.sparkfun.com/commerce/product_info.php?products_id=9267). The new version uses the AD…
**Replacement:**[DEV-10085](http://www.sparkfun.com/products/10085). We don't sell this board any longer, however we do still…
**Replacement:** None. We do not have a direct replacement for this product. This page is for reference only. Schemer is a t…
**Replacement:**[DEV-11260](https://www.sparkfun.com/products/11260). The new version of this board swaps the NCP1400 out for…
**Replacement:** None. We are no longer making this board. This page is for reference only. These strips of flexible PCB are…
**Replacement:**[DEV-11032](http://www.sparkfun.com/products/11032). We've changed the color of the fabric swatch and merged …
**Replacement:**[RTL-11261](https://www.sparkfun.com/products/11261). The new version of this board is easier to snap apart! …
**Replacement:**[DEV-10964](http://www.sparkfun.com/products/10964). The ProtoSnap E-Sewing Kit now includes a coin cell batt…
**Replacement:**[DEV-10506](http://www.sparkfun.com/products/10506). The ProtoSnap LilyPad Development board has replaced thi…
**Replacement:**[DEV-10055](http://www.sparkfun.com/products/10055). This page is for reference only. This is a conductive k…
**Replacement:**[DEV-10730](http://www.sparkfun.com/products/10730). This part has been revised for a minor hardware change. …
**Replacement:**[DEV-11259](http://www.sparkfun.com/products/11259). The new version of this board is based on the NCP1402 as…
**Replacement:**[DEV-10867](http://www.sparkfun.com/products/10867). We now carry a new conductive thread on 60' bobbins. Thi…
**Replacement:**[DEV-11008](http://www.sparkfun.com/products/11008). The latest version of this board is built with surface m…
The LilyPad ProtoSnap Plus Kit is an all-in-one e-textile prototyping kit that has been designed to incorporate electronics i…
Sewable LED Ribbon is quite possibly one of the easiest ways to incorporate simple illumination and color effects into your n…
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery,…
This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will o…
The LilyPad Sewable Electronics Kit lets you explore the wonderful world of e-textiles through a series of introductory proje…
This EeonTex fabric is a bidirectionally stretchy nylon/spandex, elastic fabric coated with a long-lasting conductive formula…
This EeonTex fabric is a conductive, nonwoven microfiber with piezo-resistive functionality for use in dynamic sensors to map…
The Chiclet Sound Kit is Aniomagic's avant-garde way to make interactive textiles, paper, ceramics, and environments. They've…
This is 300 meters of conductive yarn spun from a stainless steel polyester fiber blend and wound on a spool. You can use it …
This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootlo…
This is a conductive knit fabric for use in e-textiles. It is similar in feel to a nylon ripstop material. It is highly condu…
If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do th…
The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be d…
Short Circuits offers students opportunities to undertake physical computing projects, providing tools and methods for creati…
Soft Circuits introduces students to the world of wearable technology. Using Modkit, an accessible DIY electronics toolkit, s…
The ProtoSnap series is a great way to prototype your project without a breadboard. Everything is wired together on a single …
These are white 5" x 3" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, an…
This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than…
Would a rose by any other name shine as bright? If we are talking about an actual living rose then, no, probably not. This it…
**Replacement:**[KIT-12729](https://www.sparkfun.com/products/12729). The Sparkle Diamond Kit has a new rev with a new way to…
These T junction ELastoLite® connectors are perfect for connecting multiple electroluminescent panels to a single EL inverte…
The ProtoSnap LilyPad Development Board is a good way to introduce and explore e-textiles. This LabPack includes everything y…
The SparkFun Paper Circuits Kit teaches the basics and fundamentals of creating an electric circuit without the need to solde…
Open Softwear* is a book about fashion and technology. More precisely it is a book about Arduino boards, conductive fabric, r…
The INV133 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive any EL pane…
The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single bo…
The Chibi Chip is the heart of the LTC system. You can use the Chibi Chip to bring life to your Chibi Lights LED stickers by …
The LED Effects Add-On Pack provides you with four unique stickers to make your LEDs blink, twinkle, and generally effect the…
This accessory for the Love to Code Chibitronics line is an OLED that has been designed to help you understand what’s going…
ChickTech's Soft Circuits Kit is a fun combination of electronics, software, and art!
An essential companion to the Chibi Chip, the Chibi Clip Mounting Accessory enables rapid testing and re-use of the microcont…
This black fiber optic fabric is a cool and unique way to add some shine to your e-textiles project. There are optical fibers…
This 30x30cm black fiber optic fabric is a cool and unique way to add some shine to your e-textiles project.
This is a small board for prototyping through-hole components with the LilyPad system. There are an array of pins all shorted…
The S-bus is perfect for when you need to make an unusual geometry from our LEL (Loomia Electronic Layer) buses.
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels,…
A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are relatively large 18mm diameter snaps (al…
The 3x3 mini pressure matrix has six leads, allowing you to map which point you are at in the 3x3 matrix.
The single pressure sensor gives you an analog read that maps to force on the sensor.
Are you looking for a fun and simple e-textiles project? The Firefly Jar Kit is a great project for anyone from beginners to …
If you’re interested in interactive toys, smart accessories, or light-up fashions, this book is for you! Sew Electric is a …
This LED sticker pack from Chibitronics is a set of 30 individual white LEDs to brighten up your paper circuit projects.
The LilyPad SimpleSnap is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled…
This is a very small, extremely lightweight battery based on Polymer Lithium Ion chemistry. This is the highest energy densit…
The Loomia Single Backlit Button is a simple mechanical switch that comes with an LED inside.
Here we have some conductive ribbon. Essentially, it's a fabric with 3 conductors woven into the ribbon. It measures roughly …
Slim, extremely light weight batteries based on Lithium Ion chemistry. Each cell outputs a nominal 3.7V at 1000 mAh!
This LED sticker pack from Chibitronics is a set of 30 individual red, yellow, and blue LEDs (10 of each) to make your paper …
This is a very small, extremely light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest ener…
The LilyPad ProtoSnap Plus Lab Pack is an all-in-one e-textile education kit that has been designed to teach incorporating we…
The LilyPad Simblee BLE Board is a wearable development board that allows you to add mobile application functionality via Blu…
Sure, your flashing, chip-tune playing t-shirt is really cool at the party... but at some point you need to turn it off. And …
The Wearables Bundle is a small kit of multiple Lilypad boards and accessories that provides you with a great place to start …