Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
**Replacement:** None. We don't carry a direct replacement for this kit but check out the rest of our [magneto category](http…
An awesome 5-point multitouch capable touchscreen, all over I2C!
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to …
**Replacement:** None. We are no longer carrying these MicroMags in our catalog. This page is for reference only. [PNI Corp'…
**Replacement:**[SEN-11828](https://www.sparkfun.com/products/11828). This part has a new rev that accepts a lower voltage in…
**Replacement:** None. We're no longer carrying this hardware. This page is for reference only. This is the mounting hardwar…
This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. I…
These easy-to-use ultrasonic rangefinders from Maxbotix work the same way as the EZ line that you know and love, but this new…
**Replacement:**[SEN-10988](http://www.sparkfun.com/products/10988). While it isn't a drop-in replacement, the TMP36 is very …
The HMC6343 is a solid-state compass module with tilt compensation from Honeywell. The HMC6343 has three axis of magneto, thr…
This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel…
Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usu…
RFID 2 Click is a compact add-on board that contains a stand-alone RFID reader with a built-in antenna easy-to-use for embedd…
**Replacement:** None. We are no longer carrying this CMOS camera in our catalog. This page is for reference only. The TCM82…
**Replacement:**[DEV-12081](https://www.sparkfun.com/products/12081). We've turned this board into a shield and updated quite…
Atlas Scientific is on a mission to make high-quality sensors for environmental monitoring available to everyday hackers and …
Stretch Click is a mikroBUS™ add-on board with circuitry for measuring stretch forces with conductive rubber cords.
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your A…
The XL series of MaxSonars are a super high-performance version of the easy-to-use sonar range finder from [Maxbotix](http://…
The Serial Accelerometer Dongle is a 3 axis accelerometer up to +/-6g with a simple serial interface. The Serial Acceleromete…
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunc…
Your computer science department in a box! From beginner's coding to advanced AI, bring CS learning to life.
This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart low-power, …
These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes …
The SparkFun SGP40 Air Quality Sensor provides a measurement of the quality of the air in your room or house. The Sensirion m…
The 9DOF Razor IMU incorporates three sensors - an [ITG-3200](http://www.sparkfun.com/products/9793) (MEMS triple-axis gyro),…
The OpenMV M7 Camera is a small, low-power microcontroller board that allows you to easily implement applications using machi…
Manometer 2 Click carries the MS5525DSO digital pressure sensor, based on leading MEMS technology from TE Connectivity.
**Replacement:** None we are no longer carrying this CMOS IR camera in our catalog. This page is for reference only. This is…
VCT Monitor Click is a compact add-on board that contains a highly integrated monitoring solution without compromising accura…
The ZMOD4450 Refrigeration Air Quality sensor is designed to measure gases emitted by food ripening or rotting.
The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to…
**Replacement:**[SEN-11931](https://www.sparkfun.com/products/11931). We've updated a few reported issues with this board, go…
SMD 20-pin 0.4mm pitch 'plug' connector for the 640x480 Color CMOS Camera.
**Replacement:** None. This part is now end-of-life and we don't carry a direct replacement. Check out the rest of our [accel…
This breakout board has been retired, but check out its Red Cousin SparkFun Pulsed Radar Breakout - A111! Does your projec…
**Replacement:** None. We no longer carry this IC, but check out our [sensors category](http://www.sparkfun.com/categories/23…
**Replacement:** None. There is no direct replacement for this part, however we do carry a wide selection of dual-axis accele…
Introducing the BITalino, a (comparatively) low cost biomedical data acquisition dev board that allows you to create projects…
Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis…
The BitZero is a small accessory piece for your Shapeoko CNC machine meant to assist in finding the edges, or datums of the p…
Barcode 2 Click is a board that contains a image recognition system that is compliant with a wide range of different 1D and 2…
6DOF IMU 7 Click is based on the ICM-20649, a high-performance, 6-axis MEMS MotionTracking™ IC from TDK Invensense.
**Replacement:**[SEN-11005](http://www.sparkfun.com/products/11005). We are now carrying a current transformer from a differe…
**Replacement:** None. We are no longer carrying this sensor in our catalog. This page is for reference only. The MagnetoPot…
Bare Conductive has created intricate patterns on this three-pack of Printed Sensors for you to use in touch and proximity se…
The pi-top Electronics Kit, a metal ‘bento box’, contains 14 components including programmable sensors, buttons, and LEDs…
**Replacement:**[SEN-10724](http://www.sparkfun.com/products/10724). The new revision replaces the HMC5843 with the HMC5883L.…