Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character…
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these b…
These Adam Tech Wall Adapter Cables are terminated with a standard European (CEE 7/7) plug at one end and three insulated spa…
The EX8036 Stereo Camera is a high-end imager controller and patterned IR illuminator with a global shutter capable of both c…
This isn't your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work wit…
The BMD-34 series are advanced, highly flexible, ultralow-power multiprotocol modules that enable concurrent Bluetooth 5, Thr…
The SparkFun gamer:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you…
This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this on…
The Teensy is an amazing development platform that allows you to get more computing power than an Arduino Uno, and in less sp…
These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 …
**Description**: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed be…
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon ca…
The ZMOD4450 Gas Sensor Module is designed for detecting gases associated with food ripening or rotting.
These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic …
This is a glass ferrule type fuse. It fits great with our 5mm fuse clips. The fuse is rated for 250VAC, up to 500mA. Fuses ar…
Huge 10mm through-hole LEDs. Mood-light an entire wall!
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerom…
The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuit…
**Note:** This camera case does not currently fit the [Raspberry Pi Camera Module V2](https://www.sparkfun.com/products/14028…
With the SparkFun Cryptographic Development kit you will get everything you need to learn the fundamentals of cryptographic a…
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries.
Introducing the Neutis Development Kit from Emlid! This Quad Core System on a Module in a dev kit is perfect for makers and d…
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it…
The Double Backlit user interface is like the Single Backlit Button, but twice the fun!
This is a 34' roll of thermal printing paper for use with our thermal printer. This roll is smaller than you find at most off…
This is a simple strip of five signal-conditioning Balun Ember Transformers from Wurth Elektronik that allows you to convert …
This sleek, red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo and our moniker to Start Something!
The Argon40 Fan HAT for the Raspberry Pi Model B boards is a great way to cool your board during more intensive applications.
Introducing the Neutis N5 Module from Emlid! This Quad Core System on a Module is perfect for makers and developers!
