- Home
- Product Categories
- General
- COM-10761
images are CC BY-NC-SA 3.0
Description: This is the knob that connects to the motorized linear slide potentiometer. It friction fits quite snugly onto the slide.
Documents:
Related Products
Customers also purchased
-
![]()
Slide Pot - Motorized (10k Linear Taper)
COM-10976These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The…
19.95retired
-
![]()
Slide Pot - Motorized (10k Audio Taper)
COM-10734These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The…
19.95retired
-
![]()
Clear Plastic Knob
COM-10597This plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a shaft. These are clear s…
0.95retired
-
![]()
Rotary Encoder - Illuminated (Red/Green)
COM-10596Rotary encoders are used similarly to potentiometers. They're different from potentiometers in that an encoder has ful…
2.95retired
-
![]()
FTDI Basic Breakout - 3.3V
DEV-09873This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and mor…
14.95retired
Recommended products
-
![]()
Slide Pot - Motorized (10k Audio Taper)
COM-10734These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The…
19.95retired
-
![]()
Slide Pot - Motorized (10k Linear Taper)
COM-10976These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The…
19.95retired
Comments 5 comments
No account? Register one!
Forgot your password?
From what I can tell from some experimenting, this knob does not work with the touch sensing abilities of the motorized fader it is recommended for!
Does this work with the regular slide potentiometer?
From looking at the pictures, I do not believe it would work without very heavy modifications.
Is this solid plastic? Will this inhibit the capacitive touch capabilities in any way?
Most touch sensitive faders use metal knobs for the touch capabilities.