{"id":11520,"sku":"DEV-11520","name":"Fio v3 - ATmega32U4","description":"
The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4.Not only is it small and LiPo-ready, it's a very capable XBee-ready development board.<\/p>\n\n
The JST-connector and 3.3v system voltage make this a great development tool for portable devices, simply plug in a Li-Poly battery and you're ready to go. Wireless sensor networks and communication are made easy by the on-board XBee socket.<\/p>\n\n
The ATmega32U4, running at 8MHz, makes it possible for you to use the on-board USB jack not only to charge a connected Li-Poly battery but to actually program the device! Because this board uses a similar bootloader to the one on the Pro Micro, you will need to download and install the special software driver below. There's also a board definition add-on for the Arduino IDE which will add support for this board.<\/p>\n\n
We've updated this to the latest version of the 32U4 firmware, see the firmware note in the documents below!<\/p>\n\n
Note:<\/strong> See the GitHub link below for support with the Arduino IDE.<\/p>\n\n Features:<\/strong><\/p>\n\n Documents:<\/strong><\/p>\n\n\n
\n