Servo Extension - CAT6 (non-boosted)

This “non-boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable before being converted back into servo pin-outs on another extension board (sold separately). This non-boosted servo extension board simply allows you to use a CAT6 cable to transmit your servo signals and power. It is limited to around 8 feet. If you want to transmit longer distances, couple it with a boosted adapter (check below).

Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

Servo Extension - CAT6 (non-boosted) Product Help and Resources

1 of 1 found this helpful:

Boosted vs non boosted

The Servo Extension - CAT6 (boosted) board is receive only and should be at the servo end of your cable run. Use the Servo Extension - CAT6 (non-boosted) board (this product) on the sending end of your cable. The non boosted board can be used as a transmitter or receiver but only if your CAT6 run is short.


Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels


Customer Comments

Customer Reviews

No reviews yet.