It is that time again! SparkFun Electronics will be closed Friday, January 13th for our annual inventory day. Please keep in mind that any orders placed after 2PM (Mountain Time) on Thursday, January 12th will not ship or be prepared for local pickup until we open for normal operations on Monday, January 16th. In addition, tours will resume on Friday, January 20th. Thank you for your patience!
Description: The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison packs a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single-board computer. Powered by the Intel® Atom™ SoC dual-core CPU and including an integrated WiFi, Bluetooth LE and 70-pin connector to attach a veritable slew of shield-like “Blocks,” which can be stacked on top of one another. It’s no wonder how this little guy is lowering the barrier of entry on the world of electronics!
The Intel Edison packs a robust set of features into its small size, delivering great performance, durability and a broad spectrum of I/O and software support. Those versatile features help meet the needs of makers, inventors and beginners. This is a module with a high-speed processor and WiFi and Bluetooth radios onboard. Its low power and small footprint make it ideal for projects that need a lot of processing power but don’t have the ability to be near a larger power source or have a large footprint.
If you are looking to add a little more stability to your Intel Edison stack, check out this Hardware Pack. It will provide you with increased mechanical strength for stacking Blocks on your Edison!
Dimensions: 35.5 × 25.0 × 3.9 mm (1.4 × 1.0 × 0.15 inches) Max
Based on 21 ratings:
4 of 4 found this helpful:
I’ve installed ubilinux, compiled and add uvcvideo modules and install mjpeg-streamer. With a logitech 930 webcam I can now look at my vacation home from a remote point where I’ve installed a solar pannel, the edison and the webcam. I’m very pleased since it works like a charm.
I’ll now work for some home automation, for fun
2 of 2 found this helpful:
I highly recommend the Intel Edison to anyone who want an Arduino with the power of a Raspi
Check out my first project @ http://www.instructables.com/id/Smart-Helmet-Intel-Edison-Sparkfun-9DOF/
And please, please be a friend and vote for us!
8 of 8 found this helpful:
The Intel Edison fits two categories – those who want an Arduino compatible dev board with a few more features, and those who want a true low-power, fast SoC and don’t mind doing some work for it.
The unfortunate thing with the Edison is that 95% of the people who purchase one are in the former category. It has a great toolset that allows you to build Arduino-like projects on the Arduino dev board. It seems that when Intel was first pushing these, they sent out the Arduino dev boards to everybody – so pretty much ALL the tutorials cover that and only that. I’d venture to say that most people are not exploring what this board can do when not paired with the Arduino dev board.
I fall into the second category. This board that includes WiFi, BT plenty of storage and a large amount of RAM is fully x86 compatible and runs Linux with no problem (it comes pre-loaded with a Linux that designed for SoC board – in fact it was the one that the BBB came with originally). 1.8v and low power consumption means this thing can run off a single 9v battery for about 2 weeks – 3 if it is mostly idle. The biggest gripe I have with this is that there is little to no documentation on many portions of if. Like all the other SoC’s out there, flipping pins are slower than the Arduino, and since everything you do is based on 1.8v and not 5v, plan on buying a bunch of TTLs (or use Sparkfun’s awesome GPIO breakout board!).
As far as raw performance goes, this thing is at least 2x faster than the BBB and 3x faster than the Rasp Pi. It’s fast enough where it is totally feasible to run a Java based app and a DB like MySQL right on the board and it won’t bat an eyelash. It is powerful enough to be a full web server or whatever else you want it to do.
Out of the two projects I’ve started with this, one should be released to manufacturing this fall. Intel is fully able to commit to orders of 1,000 or even 10,000 of the board in short order – which is where all the other SoC boards fall flat.
1 of 1 found this helpful:
Easy to work with, easy to develop software, and MUCH more embeddable than an Rpi.
2 of 2 found this helpful:
Intel has done a really excellent job with this. Sure, you can criticize it a dozen ways, but if you need something that does what it does in the form factor it’s in, you can’t beat it. I’ve installed Debian for dev with it, with the intention to revert to a custom built Yocto once I have the system settled. This is the best platform I see for developing powerful wearables with very impressive power consumption and a familiar(ish) environment.
2 of 3 found this helpful:
I have 2 Edison boards, the Arduino base, & 9 other boards along with 3 HW kits.
I would really appreciate if Sparkfun provided one or two scenarios from start to end on using the kits. I am finding it difficult to start to use a configuration with the current level of documentation which jumps around too much. Right now I haven’t connected any power because I can’t find enough data to be confident I won’t damage a board.
1 of 5 found this helpful:
I’m on Windows, not using Arduino. I’m using the 9 degrees of freedom block and the console block. I cannot get a hello world to run. I would like it if SFE would publish a Getting Started without Arduino, or some documentation that would explain fully a start to finish guide using Eclipse or even command line.
Small footpint, relatively low power yet runs a decent version of Linux. The commpute power allows the use of pipes and simplifies the work I am trying to accomplish significantly. Also allows the work flow to be very modular. WiFi works very wel.l
I was only interested in the Edison for native C++ development. It was almost impossible to get any sample code to run even after running the gauntlet of installing the Intel IDE, Docker and a bunch of other stuff. Unless you are very familiar with Unix embedded system development and open source libraries with very little documentation, be prepared for a challenging experience.
So much power in a tiny package and relatively inexpensive.
I’m using this as part of a DIY medical device for my son, and even after the first day, we can’t possibly live without it. This perfect component is indispensable to us!
Using the Edison blocks (base, gpio, ADC and battery), the package is very handy. I’m tapping off the I2C on the ADC board for a temp sensor. It would be extremely useful to have an RTC backup battery board .. or modify the battery board to include that as well. A patch can be found on the Intel Edison Community which enables setting the parameters of the RTC backup battery control register for use with a commonly available rechargeable lithium coin cell. I posted a mod to the Arduino breakout board for such an external battery on the Edison Communities.
VERY small! Generally very easy to use. The Wifi isn’t great - I wish the uFL could be used without having to cut the 0R to the on-board antenna. Bluetooth works well.
Screws in nicely to the Intel board but getting the Hardware Pack is nearly a necessity with the red boards supplied by SparkFun. Those boards make the whole thing amazingly tiny.
Had to put tape (as recommended) over the USB connections when connecting to the battery board. Used 2 layers of electrical tape - haven’t shorted yet.
I have received my Edison and a Sparkfun Edison Base. From the Edison Tutorial, I thought it would be really easy to use. However I have not been able to communicate with this device from my Windows machine. Sparkfun Technical are sending me a new Edison base.
Use with the base block and the OLED screen. Very cool as you can terminal into the Linux OS running onto the thing from any OS via USB and upload apps over WiFi.
It’s a great platform to plat with. Especially if it has t be very very little and still easy to use
I’m not doing Arduino or any of that hipster Node.js stuff on Edison, more into the MRAA side of things, Intel are doing a good job on support so far and the OS is getting better and better.
Sparkfun’s Blocks are also very cool (i’d love to see a little extender cable from one to another for more layout options), most of them work well together and I hope Sparkfun improve them and maybe even make some more types (GPU Block). You can of course plug anything into the Blocks to connect more sensors and devices so your covered.
As a designer I’m use them for rapped prototyping here at Sony, very handy and very easy to just make a few tests, snap and play is awesome.
I have some experience working with embedded platforms using Linux. The easier to use so far!!!!
I just miss it should have breadboard friendly small, however supporting all the pins and level shifting, breakout board.