SparkFun Electronics Commentsurn:uuid:214d0e4e-f1b1-d287-ce26-ac5b4c9f82492024-03-28T19:09:41-06:00SparkFun Electronicsswolf on PRT-13268 - SparkFun Snappable Protoboardswolfurn:uuid:17f84d27-ad46-8916-6a4b-060dba53bfd62018-10-15T11:07:28-06:00<p>anyone have a good tutorial for adding traces to rows or columns of pin holes?</p>
e3b0c442 on PRT-13268 - SparkFun Snappable Protoboarde3b0c442urn:uuid:64c99a9a-b8df-a6e9-6fa5-cb9ae88601342018-06-13T14:10:38-06:00<p>I can't review since I purchased this via Digi-Key with a larger order of stuff that Sparkfun didn't carry all of... unfortunately, the holes are on the small side. They would not even fit a button that had 1mm leads. I'll need to find something else to prototype with.</p>
Customer #880478 on PRT-13268 - SparkFun Snappable ProtoboardCustomer #880478urn:uuid:d7d188f5-e7d6-1416-4384-4735b872fcf42017-02-06T16:32:30-07:00<p>What are the dimensions?!</p>
bbotany on PRT-13268 - SparkFun Snappable Protoboardbbotanyurn:uuid:564c735e-e69e-9015-912d-6e84a43654c12015-11-25T14:14:13-07:00<p>The video mentions "Low pile concrete over carpet". Like <a href="http://www.julialohmann.co.uk/news/2008/06/03/resilience-concrete-and-wool-tables-design-miamibasel-2008/" rel="nofollow">this table</a>? Seems like a lot of construction work to get an internal cutout from this board, but at least you can get the wool carpet pre-made: you can skip the shave-a-yak step!<p>(Yes, internet sea lions, I understood the intent in the video: I hope you will understand that I'm so amused that in this particular case what was <strong>actually</strong> said also exists, that I wanted to share.)</p></p>
R0B0T1CS on PRT-13268 - SparkFun Snappable ProtoboardR0B0T1CSurn:uuid:18b19d42-4ca4-5f55-e232-dd29d59bd2592015-09-09T11:38:45-06:00<p>Thank you, Sparkfun, for your obvious concern for my respiratory health. Cutting protoboards with a dremel can make quite a mess.</p>
SFUptownMaker on PRT-13268 - SparkFun Snappable ProtoboardSFUptownMakerurn:uuid:7b45106c-28fa-d2ae-a15b-05d3b52346002015-08-08T04:32:34-06:00<p>I prefer them unconnected; it's easier to make connections than to break them in my experience.<p>I do use a lot of wire wrapping with this, and solder blob tracing.</p><p>I had considered some buses on this, but the V-score actually makes that impossible. It will break any copper it crosses and it <em>must</em> go the whole width of the board.</p></p>
SebCestBien on PRT-13268 - SparkFun Snappable ProtoboardSebCestBienurn:uuid:ba42ed9a-ad29-b0fe-6c45-edc2590c6a692015-08-08T03:04:17-06:00<p>What is the utility so ? (mockery) Wrapping ?
Breadboard, verobord, and - in my mind - all protoboard was connected...</p>
CaseyTheRobot on PRT-13268 - SparkFun Snappable ProtoboardCaseyTheRoboturn:uuid:731cee91-3436-8193-4c7d-573489bfcd8d2015-08-07T10:55:22-06:00<p>They are not connected.</p>
Pecacheu on PRT-13268 - SparkFun Snappable ProtoboardPecacheuurn:uuid:3003fc29-a241-bb3c-6db4-25834fce35de2015-08-07T10:10:16-06:00<p>I am wondering this too. I got a protoboard from eBay last week and in the picture the holes looked connected, but when I got it I found out they weren't.</p>
Lefty4000 on PRT-13268 - SparkFun Snappable ProtoboardLefty4000urn:uuid:f395b264-77af-3d5a-7943-405174ac6a6b2015-08-07T09:40:34-06:00<p>Innovation like this is why sparkfun is around!</p>
SebCestBien on PRT-13268 - SparkFun Snappable ProtoboardSebCestBienurn:uuid:bee55fea-4341-a09d-cbaf-6b0c74c0e4f52015-08-07T09:22:03-06:00<p>Very noob question.. but.. I ask :
How the points of this board are connected between them ?</p>
SFUptownMaker on PRT-13268 - SparkFun Snappable ProtoboardSFUptownMakerurn:uuid:ab8e9eb8-cf3e-8ca7-1a14-4a2bca5f56872015-08-07T09:09:11-06:00<p>It is!</p>
icyfyer on PRT-13268 - SparkFun Snappable Protoboardicyfyerurn:uuid:8c796e8d-c93f-8f6e-723b-96d6a858eb892015-08-07T08:58:06-06:00<p>It's about time! No more trying to cut the right size with a hack saw, and accidentally screwing the whole thing up. Thanks, SparkFun.</p>
Osqui on PRT-13268 - SparkFun Snappable ProtoboardOsquiurn:uuid:23a4d730-8748-8ad3-a96d-181cc7d6361e2015-08-07T03:37:12-06:00<p>Is it double-sided? Thanks</p>
amateurasu on PRT-13268 - SparkFun Snappable Protoboardamateurasuurn:uuid:a831ef42-78f5-5e53-e6dc-3473a7112caa2015-08-06T21:16:45-06:00<p>What a great idea!</p>
tzankoff on PRT-13268 - SparkFun Snappable Protoboardtzankoffurn:uuid:5310555b-44e6-da95-b1ec-3fdb92c2a0a22015-08-06T17:48:30-06:00<p>It's funny how that always seems to happen. :-) #GoldMembership</p>
cyclicredundancy on PRT-13268 - SparkFun Snappable Protoboardcyclicredundancyurn:uuid:5ecd0d50-7aa3-3bb5-3a81-e3c0c770ab232015-08-06T16:35:50-06:00<p>Whoa! Wish this had been available when I placed my order earlier this week.</p>