The Ethernet Expansion Board adds an Ethernet port to your Omega with a maximum connection speed of 100Mbps. While the Omega is all about wireless connectivity, a reliable wired network connection can be a great addition to a project, and the Ethernet Expansion is a great tool for quickly reflashing your Omega’s firmware.
Since the Omega is so flexible when it comes to networking, you can use the Ethernet Expansion to provide network connectivity to the Omega, connect a modem to your Omega and have it act like a router, or provide network connectivity to a wired device by bridging a wireless network. Please be aware that the Ethernet Expansion Board makes use of the Omega’s exposed Ethernet pins, so only one Ethernet Expansion can be used with the Omega at any given time.
The Onion Omega boards we carry are separated into three different categories: Mainboard, Dock and Expansion Board. This board falls into the Expansion Board category, meaning you will need an Omega Dock that is equipped with a 30-pin Expansion Header like the Expansion Dock or Arduino Dock R2.
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels
Based on 1 ratings:
I wanted to set up an Ethernet bridge so I could connect to a wired network with WiFi. This board was easy to install. I just followed the directions to set it up. No drama and no issues encountered.