urn:uuid:214d0e4e-f1b1-d287-ce26-ac5b4c9f8249 2017-07-14T04:20:36-06:00 SparkFun Electronics Customer #565914 urn:uuid:3ae37c07-66a2-797d-2e1d-ba964b21595d 2015-01-03T11:26:11-07:00 <p>Same for me. I wouldn&rsquo;t force it. I bought both the laser and the mount ~5 months ago and the laser stays 2 - 3 millimeters inside the mount.</p> Customer #565914 urn:uuid:253e7538-83c1-50ac-5240-586c2efee927 2014-08-11T23:31:55-06:00 <p>If you own this product, and the pan-tilt sub-micro servo bracket (ROB - 10335), I made a binding design so you can mount this module on the servo bracket. I printed the part out with makerbot and I can confirm that the dimensions are correct. I uploaded the model to 3D Warehouse. Here&rsquo;s the link: <a href="https://3dwarehouse.sketchup.com/model.html?id=ufc8e3034-6f24-4df8-abb3-eac264778331" rel="nofollow" >Pan-Tilt Binding for Laser Module Mount</a>.</p> Julian4 urn:uuid:2976728b-fce4-8f62-a3c4-32fc939334aa 2013-07-23T12:56:50-06:00 <p>I see that in the picture the lasers mount flush with the edge of the mount but in none of the eight units I own this is possible. I&rsquo;m afraid that if I push harder, the laser will break. Are the new mounts different from the ones in the pic? Or maybe the new lasers are different&hellip; Any help is greatly appreciated.</p>