Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 12
Wish List

Infrared Sensor Jumper Wire - 3-Pin JST

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness.

If you need this cable and the mating connector, check out the wire assembly in the related products below!

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • crispernaki / about 14 years ago / 4

    Normally I'd be thinking that folks are really lazy if they have to buy a wiring harness like this... but DANG the connectors are a pain in the behind to DIY! These assemblies are totally almost worth their weight in gold. Nice to know the folks as Sparkfun got our backs.

    • Ilektron / about 14 years ago / 1

      The crimp pin variety of these is a pain in the behind! I think the official crimp tool costs hundreds of dollars. That being said, there is an IDC version of this connector that when used with the correct awg wire can bring cable assembly to a couple of minutes.

  • Member #314402 / about 10 years ago / 1

    it blows my mind there is not a simple "hook black to ground, red to power, yellow to input reading" in the description nor is there configuration help in any of the sharp sensor product descriptions what is the appropriate wire configuration (color wise)?

  • Member #413870 / about 11 years ago / 1

    can i just hook this up to my arduino to turn an led on if the ir beam is broke?

    • Kamiquasi / about 11 years ago / 1

      Well, not just this - this is just the cable with connector that mates to the proximity sensors (see Related Products below). And with those, you could - up to a point.. they're more used for detecting proximity. Check out some of the other infrared / optical products if you just need to know if a beam's broken or not.

  • JerZ / about 11 years ago / 1

    I'm going to cross my fingers and hope this is the 2mm version when I order, All the JST's in my parts box are 2.54mm and a bit too big for the IR Ranger.

  • Member #245774 / about 13 years ago / 1

    Please somebody reply- i have 2D120X F 04 range infrared sensor. The above JST cable is the right one right?

  • Kasimir / about 13 years ago / 1

    is it the same connector mounted on this cable?
    http://www.sparkfun.com/products/9915

    • fugalster / about 13 years ago / 1

      As far as I can tell, yes. Though without a datasheet on this product I can't be certain.

  • __Tango / about 13 years ago / 1

    What type of connector is this? I know it's a JST, but which one?

    • __Tango / about 13 years ago / 1

      Never mind. PH series, as per http://www.sparkfun.com/products/9750

      • Cyrus / about 9 years ago / 1

        so are you saying this connector is a jst ph? or not?

  • JChristensen / about 13 years ago / 1

    Does this fit the 3-pin connector on the serial LCD displays, e.g. part no. LCD-09393?
    If so, I'd recommend a note/link to that effect on the LCD pages.

    • Toni_K / about 13 years ago / 1

      This does fit the connector on the serial LCDs. Good call on the product link! Thanks for pointing that out to us.

      • Member #270359 / about 12 years ago / 1

        ToniK, still no note on the serial LCD pages stating this is the required jumper. Would have saved me quite a headache this week had it been there.

  • samw8888 / about 14 years ago / 1

    will these hook up to the connectors on the CMOS camera module? (sku SEN-08739)

Customer Reviews

5 out of 5

Based on 1 ratings:

Currently viewing all customer reviews.