urn:uuid:214d0e4e-f1b1-d287-ce26-ac5b4c9f8249 2017-07-15T01:13:15-06:00 SparkFun Electronics neg urn:uuid:f465228b-3fc4-7ab9-7a1e-898aeb3a5fef 2015-06-24T11:25:31-06:00 <p>seriously why is there not an eagle part for this</p> Customer #337772 urn:uuid:b65ec4d0-cd5b-0125-e6a4-c057ab0e37c5 2013-04-17T17:18:39-06:00 <p>Is this component in the SparkFun EagleCad library? I can&rsquo;t find it under Battery Holders :-(</p> Isdale urn:uuid:28a4df8a-cb95-ab74-2c1c-6585f16b725d 2012-04-02T02:11:49-06:00 <p>Holes in these are very small, requiring a fairly small (#12) needle. The eye of these is small and pretty much requires using a needle threader. (find bulk buys on ebay. Batteries can be had on ebay cheap too.)</p> jamesotron urn:uuid:65723391-38e0-0dc8-6bd8-bd6ab6dfacb9 2011-08-31T02:32:48-06:00 <p>I can&rsquo;t seem to find this part in the SparkFun eagle library. Can anyone point it out?</p> Customer #152799 urn:uuid:2f0e9f61-ad88-c7d7-c2f0-0ccb5cb6449a 2011-04-28T06:27:11-06:00 <p>Can this holder accept 2 cells?</p> DSCRIMAGER urn:uuid:38cf0364-677d-d154-5549-6628ae944e2f 2011-01-02T20:15:51-07:00 <p>Be prepared to drill out the holes on this. They are smaller than the holes on the other elements (LEDS, Switches) that I have tried so far, which means that sewing needles that work for everything else will be too large for this. Also, the two mounting pads are not really sufficient for attaching this to clothes in any exposed way; you&rsquo;ll need to think about placement and protection from snagging. Works great as far as battery replacement.</p> hypatia dot ca urn:uuid:9aee5f7d-05ff-a2da-c688-8b26ce729b1c 2010-12-18T01:05:19-07:00 <p>These are honestly the nicest coin-cell holders I&rsquo;ve ever used. I replaced the holder on the back of my 2010 DefCon badge with one of these - <a href="http://www.flickr.com/photos/hypatiadotca/4895007563/in/photostream/" rel="nofollow" >pic here</a>. The original had snapped off from the force of removing the battery; these require barely any force to get the battery out.</p> Nate urn:uuid:6936d9dc-c900-abd8-07ee-5fd7490ab89f 2008-10-03T13:41:15-06:00 <p>Possibly, but we can&rsquo;t find one at the moment. It&rsquo;s actually kind of difficult to find SMD holders that have the hole in the tab (designed to aid reflow in real life). The CR2450 is also a more unique size making it harder to find.</p> Kevin urn:uuid:f59a6011-29cb-4bb1-3f76-97d6e39ecd2c 2008-09-04T12:06:48-06:00 <p>Is there a version of this holder that would be compatible with the rechargeable Li coin cell on your site (size: CR2450)</p> Wayne urn:uuid:a1b78d74-7b01-226e-edc7-b3387426ea6a 2008-08-19T01:30:10-06:00 <p>It would be useful to have a LilyPad-type slide switch to go with this. Would also be useful as an input mode switch.</p>