We are still shipping! However, order processing may take longer than usual and we cannot guarantee same day shipments due to staffing guidelines from the CDC. Please see all COVID-19 updates here. Thank you for your continued support.
Track My Order
Frequently Asked Questions
International Shipping Info
Mon-Fri, 9am to 12pm and
1pm to 5pm U.S. Mountain Time:
Chat With Us
This product has shipping restrictions, so it might have limited shipping options or cannot be shipped to the following countries:
images are CC BY 2.0
Replacement: None. We are no longer carrying this SMD connector in our catalog. This page is for reference only.
This is a 50-pin, narrow pitch (0.5mm) connector which mates with the ADH8066 GSM module.
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
There is a much better quality drawing of the connector here
Hope that helps
I'm aiming to get one modelled up in Eagle later and I will post a link here.
Sparkfun come on! You need to provide eagle library for this connector. Like previous gsm connectors!
Ok, I think I was able to create a library for this part from the Sparkfun schematics for the breakout board. Use this at your own risk as I have yet to try it.
Wasn't able to open this library with eagle 6. Any problems with it?
Have you tested your library?
I second! Really need this in the library.
The pdf that you are using as a data sheet is not too readable. Also could you say where pin 1 is & how the pins are numbered around the part. It makes it difficult to create a part for it in Eagle. thanks!!
The pins are usually numbered on the module you will be plugging in.
Does anyone know of a protoboard that is a good match for this?
No reviews yet.