Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Hack Pack Workshop Supply Kit

Replacement:LAB-12727. Due to restrictions with the flux pen, we were unable to ship this product so it has been removed. This page is for reference only.

The Hack Pack Workshop Supply Kit is a great way to get your hackerspace, classroom or communal workshop stocked with basic tools! Each Hack Pack includes a few hand tools like pliers and diagonal cutters as well as a few 50W soldering irons and the necessary accoutrements. Also included? Jumper wires, shrink tube, the legendary Heaterizer XL-3000 heat gun, third-hand, breadboards, and of course a few pairs of SparkFun Safety Glasses!

Whether you're just setting up shop or replenishing your workspace, the Hack Pack has everything you need to get hacking.

Hack Pack Workshop Supply Kit Product Help and Resources

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

1 Soldering

Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels

Core Skill: DIY

Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.


Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

1 Electrical Prototyping

Skill Level: Noob - You don't need to reference a datasheet, but you will need to know basic power requirements.
See all skill levels


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Awesome kit...do you think you will make a single person version of this...kind of an instant workbench in a box?

    1 x Heaterizer XL-3000 Heat Gun 1 x Mixed Pack of 100 Premium 6" Jumper Wires 1 x SFE Branded Soldering Iron 1 x Third Hand w/ Magnifying Glass 1 x Soldering Tip - Hakko - 3mm Bevel (T18-C3) 1 x Soldering Tip - Hakko - Conical (T18-B) 1 x Solder - 1/4lb Spool (0.020") Special Blend 1 x Solder Tip Tinner and Cleaner 1 x Water Soluble Liquid Flux Pen 1 x 25ft Solder Wick #2 1 x Brass Sponge 1 x IC Hook Test Leads 1 x Heat Shrink Kit 1 x SparkFun Safety Glasses 1 x Needle-nose Pliers 1 x Diagonal Wire Cutters 1 x SFE Tweezers 1 x Clear Self-Adhesive Breadboard 1 x Wire Strippers (20-30AWG) 1 x Digital Multimeter

    This would be awesome.

    • Well, there's this... pretty close: https://www.sparkfun.com/products/10874

      • yes it is close, there is another great reason to make this in the version I listed. What if I run a hackerspace? I would like to be able to buy one kit per member..not multiples of 3.

  • One addition that might be considered is an ESD protection mat-wrist strap kit. Always good to protect integrated circuits from nasty little zaps. I like my 3M mat, a bit pricey but it does the job well

  • Sparkfun, will you please make this in a single pack. I have been wanting to get all of these things, but buying them individually costs too much, and all of the kits come with things that I don't need.

  • Euroversion, pretty please!

  • I have similar thoughts. Already have some version or another of everything in this kit but just have a strange primitive urge to buy that big box and unpack it anyway. Some how that big box stuffed full of goodies puts me back to six years old on Christmas morning. Sparkfun, just cover in Alf wrapping paper, slap a big foil bow on it, and see if you don't get a few orders.

  • Oh my......why,...this would seem to be useful in a classroom!! But I want it for myself anyways!! ;-)

Customer Reviews

No reviews yet.