These are orange 2" x 2" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, and with a little bit of assembly can be easily be applied to most articles of clothing.
ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.
Note: Make sure you check out the Hookup Guide below for ELastoLite® tips and instructions.
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels
Based on 1 ratings:
I bought total 10 and more elastolite but I did not buy entire toolkit set (bought only Elastolites).
Everything is great as I expected like flexibility. I think this is well completed product. However, I found the connection using the power pads on the elastolite with the sticker is not good enough without CIRCUIT TAPE which is not included in this only elastolite item. The Circuite tape is in the elastolite kit.
I feel I should do with its entire toolkit set or the other item like wire clue. With just sticker, Iron and ordinary wire, definitely, it is not enough to hold the wire on the rubbery pads.
I hope this review helps you as additional information.