This is the Mod Kit for the Moog Werkstatt-Ø1 synthesizer. Inside this kit you will find a plethora of bits and parts that can be used in conjunction with the Werkstatt-Ø1 to create your own projects, hacks, and custom interfaces. With each different part included with this add-on like, soft pots, trimpots, resistors, LEDs, diodes, caps, jumper cables and even a mini breadboard to hook everything up, you should find it easy to build anything you’d like to add to your Moog synthesizer.
In the Documents section below you will find many projects from Moog to use in conjunction with your Werkstatt-Ø1 Mod Kit. These projects include adding a photocell, volume knob, and pressure sensitive resistor or incorporating pitchblend, dual oscillator, and LFO Rate Quantizer interfaces. There are many more projects to experiment with, check them all out!
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels
Based on 1 ratings: