Creative Commons images are CC BY-NC-SA 3.0

Retired RETIRED

This product has been retired from our catalog and is no longer for sale.

This page is made available for those looking for datasheets and the simply curious. Please refer to the description to see if a replacement part is available.

Replacement: None. We are no longer carrying this product in our catalog. This page is for reference only.

Description: Compact development board with key pad, back lit LCD, buzzer, and relay.

  • MCU: 16/32 bit LPC2106
  • 128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
  • 14.7456 MHz crystal divides down for easy communication setup
  • Internal 4x PLL = 58.9824 MHz CPU clock
  • JTAG connector as per ARM's 2x10 pin layout, ARM-JTAG (Wiggler) compatible
  • RS232 interface circuit
  • LCD16x2 display with LED Backlight
  • Five buttons
  • Dallas iButton port
  • Frequency input
  • Relay with 10A/250VAC contacts
  • Buzzer
  • Status LED
  • RESET circuit
  • Boot loader enable jumper and pull-up
  • DBGSEL, RTCK pull-up resistors
  • Power supply: +12VDC
  • DC power jack - Center positive
  • Two on board voltage regulators rated up to 800mA - 1.8V (Internal CPU) and 3.3V (General I/O)
  • Power supply decoupling/filter capacitors
  • Extension headers for uC pins
  • Four mounting holes
  • PCB: FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print

Dimensions: 4.75x1.5" (120x33mm)

Documents: LPC-MT Schematic

Comments 0 comments


Related Products