Creative Commons images are CC BY-NC-SA 3.0

Retired RETIRED

This product has been retired from our catalog and is no longer for sale.

This page is made available for those looking for datasheets and the simply curious. Please refer to the description to see if a replacement part is available.

Replacement: None. We are not carrying this product anymore. This page is for reference only.

Description: Prototype board for MSP430F1121 microcontrollers with power supply circuit, crystal oscillator circuit, and JTAG port.

Included Processor: MSP430F1121: Soldered to the back of the board.

  • FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
  • JTAG Programming Header
  • JTAG Power_In and Power_Out jumpers
  • TEST pin pull-down
  • RST/NMI pin pull-up
  • LED connected to P1.0 via jumper
  • Voltage regulator +3.3V/1A and filtering capacitors
  • 32.768 kHz crystal oscillator
  • Extension slot on every uC pin
  • Grid 100 mils
  • Four mounting holes
  • GND bus
  • Vcc bus

Dimensions: 100x80 mm (3.9x3.15")
Documents: msp430-p1121-e.pdf, Schematic, MSP JTAG connector

Software: msp430-p1121.asm test software with LED blink

Comments 0 comments


Related Products