Evaluation Board for MSP430F169

Replacement: None. We are no longer carrying this development board but have a look at the rest of our development tools. This page is for reference only.

New eval board for the MSP430F169. 8MB of NAND Flash on board for data logging or speech!

  • MCU: MSP430F169 with 60K Bytes Program Flash, 256 Bytes data Flash, 2K Bytes RAM
  • 8MB x 8 external NAND Flash memory for data storage (data logging, speech, music, etc.)
  • 16x2 Character LCD display with backlight (MSP430 port controllable)
  • Stereo (L-R) microphone inputs with pre-amplifier on A0, A1 ADC inputs
  • Stereo (L-R) linear input with buffer pre-amplifier on A2, A3 ADC inputs
  • Two trimmer potentiometers connected to A4, A5 ADC inputs (useful for volume control, etc.)
  • Stereo (L-R) linear output on A6, A7 (DAC outputs)
  • Stereo Speaker amplifier with separate volume controls L-R
  • JTAG connector
  • RS232 connector
  • RS232 interface circuit with Tx, Rx signals
  • SPI port connector
  • Dallas touch button port
  • Green and Red status LEDs
  • Three buttons
  • 32.768 kHz oscillator crystal
  • 8MHz crystal oscillator
  • TEST pin pull-down
  • RST/NMI pin pull-up
  • Power supply voltage regulators and filtering capacitor
  • Power supply plug-in jack for input voltage 7.5-9VDC
  • Extension headers for the free uC pins
  • PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
  • 120x84mm (4.7x3.3")

Customer Comments

Customer Reviews

No reviews yet.