Soldering Tip - Aoyue - 0.1mm Tip Radius

Replacement: None. As we transition our stock of irons from Aoyue to Hakko, we'll be retiring the Aoyue compatible tips. This page is for reference only.

Shiny new tips for all your lead-free soldering needs. Each tip comes with a built-in ceramic heater element. This is the LF-LI model shown on the left.

These are the quick change type compatible with Aoyue stations 2900/2901 and the HR2738 only.


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • JoshFranz / about 13 years ago / 1

    I seem to be having a bit of a problem with this tip. The very tip (1/4 inch or so) doesn't heat up. Is this common?

    • RaviG / about 13 years ago / 1

      It does heat up, its just so small its difficult for solder to stick to. Try feeding solder onto the tip by poking the very end of the solder with the tip, the solder will melt and roll up the tip. It still works when you hold it to a pad; soldered some 0402 components with it today.

  • KyleS / about 14 years ago / 1

    I was wondering if it would be possible to bring in the chisel or beveled style tips for this iron. I can find them at other sites, such as circuitexperts, however I would much prefer if you could purchase these from you.
    Other than missing a few different styles of tips, these are excellent.

Customer Reviews

No reviews yet.