Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Laser Module Mount

Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the mount and the laser will snap into place. Two screws are required and hold this mount strongly in place. Laser mount screws directly into chest plate of RFL robot for easy laser aiming.

Laser Module Mount Product Help and Resources

Core Skill: DIY

Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.


Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • If you own this product, and the pan-tilt sub-micro servo bracket (ROB - 10335), I made a binding design so you can mount this module on the servo bracket. I printed the part out with makerbot and I can confirm that the dimensions are correct. I uploaded the model to 3D Warehouse. Here's the link: Pan-Tilt Binding for Laser Module Mount.

  • I see that in the picture the lasers mount flush with the edge of the mount but in none of the eight units I own this is possible. I'm afraid that if I push harder, the laser will break. Are the new mounts different from the ones in the pic? Or maybe the new lasers are different... Any help is greatly appreciated.

    • Same for me. I wouldn't force it. I bought both the laser and the mount ~5 months ago and the laser stays 2 - 3 millimeters inside the mount.

Customer Reviews

No reviews yet.