Creative Commons images are CC BY-NC-SA 3.0

Retired RETIRED

This product has been retired from our catalog and is no longer for sale.

This page is made available for those looking for datasheets and the simply curious. Please refer to the description to see if a replacement part is available.

Replacement: None. There is no direct replacement for this item. This page is for reference only.

Description: This is the Flame Kit that we had available at the 2008 Austin Maker Faire. This kit is a great beginning through hole soldering practice board, as well as a simple development board for IR control of LEDs.

Kit Includes:

  • 1 x ATTiny13 Preprogrammed
  • 3 x LEDS: Red and Green
  • 1 x IR Optical Detector
  • 2 x 10kOhm resistors
  • 1 x Battery holder
  • 1 x 3V CR2032 coin cell battery
  • 1 x Magnet
  • 1 x PCB

Documents:

Comments 2 comments

  • We are currently working on printed instructions. However the project is very straightforward, and usually the indications that are printed directly on the board (called silkscreen) are clear enough to assemble the kit.
    As far as what it does…it’s really nothing more than a glorified “blinky thingy.” There’s a little black box in the lower right half of the board that detects when an object is right in front of it, when it detects a presence the lights start flashing. (i.e. if you have your hand in front of the board the lights turn on).

  • Are their any instructions for this project or any examples of what the Flame Kit does?


Related Products