11,099 results for 3.3V character lcd

Products 3281 found

Basic 8x2 Character LCD - Black on Green 3.3V

LCD-11708
$ 9.95
Basic 16x2 Character LCD - Black on Green 3.3V

LCD-09053
$ 13.95
Basic 16x2 Character LCD - Red on Black 3.3V

LCD-09051
$ 14.95
Basic 16x2 Character LCD - Amber on Black 3.3V

LCD-09054
$ 14.95
Basic 16x2 Character LCD - White on Black 3.3V

LCD-09052
$ 14.95
SparkFun Serial Enabled 16x2 LCD - White on Black 3.3V

LCD-09067
$ 24.95
1
SparkFun Serial Enabled 16x2 LCD - Black on Green 3.3V

LCD-09066
$ 24.95
SparkFun Serial Enabled 16x2 LCD - Red on Black 3.3V

LCD-09068
$ 24.95
Basic 16x2 Character LCD - Red on Black 5V

LCD-00791
$ 14.95
Basic 16x2 Character LCD - Yellow on Blue 5V

LCD-00790
$ 14.95
Basic 16x2 Character LCD - White on Black 5V

LCD-00709
$ 15.95
2
Basic 20x4 Character LCD - Black on Green 5V

LCD-00256
$ 17.95
Basic 16x2 Character LCD - RGB Backlight 5V

LCD-10862
$ 14.95
Basic 8x2 Character LCD - Black on Green 5V

LCD-11122
$ 9.95
1
Basic 16x2 Character LCD - Black on Green 5V

LCD-00255
$ 13.95
Mega Pro 3.3V

DEV-10744
$ 44.95
Voltage Regulator - 3.3V

COM-00526
$ 1.95
1
Basic 16x2 Character OLED -  Yellow on Black

LCD-11987
$ 24.95

View more product results...

Retired Products

LCD-09069
Retired

LCD-10150
Retired

View more retired product results...

Tutorials 294 found

Using the Arduino Pro Mini 3.3V

September 5, 2013

This tutorial is your guide to all things Arduino Pro Mini. It explains what it is, what it's not, and how to get started using it.

SIK Experiment Guide for Arduino - V3.2

October 23, 2014

The SparkFun Inventor's Guide is your map for navigating the waters of beginning embedded electronics. This guide contains all the information you will need to explore the 16 circuits of the SparkFun Inventor's Kit, 16 circuits of the SparkFun Arduino Kit, 8 circuits of the RedBoard Starter Kit.

Graphic LCD Hookup Guide

November 18, 2013

How to add some flashy graphics to your project with a 84x48 monochrome graphic LCD.

Pro Micro & Fio v3 Hookup Guide

November 8, 2013

An overview of the Pro Micro, how to install it, and how to use it with Arduino.

Logic Levels

June 3, 2013

Learn the difference between 3.3 V and 5 V devices.

OLED Display Hookup Guide

October 22, 2013

A simple hookup guide to get you started with the OLED LCD.

Mini FET Shield Hookup Guide

May 1, 2014

Learn how to hookup and use the FET shield for Arduino Pro Mini 3.3V. With this shield, you can control much larger loads such as motors or large LED strips without straining your Arduino's power.

Vernier Photogate

January 7, 2014

Vernier Photogate Timer -- using the Serial Enabled LCD Kit.

Getting Started with the LilyPad MP3 Player

May 8, 2013

The LilyPad MP3 Player is an amazing little board that contains almost everything you need to play audio files. You can use it to create all kinds of noisy projects, from MP3 hoodies to talking teddy bears. Your imagination is the only limit! This tutorial will help you get started.

LDK Experiment 3: Buttons and Switches

October 2, 2013

An introduction to the use of LilyPad buttons and switches.

MP3 Player Shield Hookup

January 13, 2014

How to get your Arduino groovin' using the MP3 Player Shield.

Creating a Humidor Control Box

March 13, 2013

Because some of our boards need to be re-humidified after reflow, we decided to make our own humidor. This tutorial will focus on how to model a project in 3D and then fabricate it using a CNC routing machine.

HMC6343 3-axis Compass Hookup Guide

August 7, 2014

How to hook the HMC6343 -- a high-end, tilt-compensated compass module -- up to an Arduino. Never get lost again!

MMA8452Q Accelerometer Breakout Hookup Guide

June 11, 2014

How to get started using the MMA8452Q 3-axis accelerometer -- a solid, digital, easy-to-use acceleration sensor.

ADXL337 and ADXL377 Accelerometer Hookup Guide

July 17, 2014

How to get started using both the ADXL337 and ADXL377 3-axis accelerometers with analog outputs.

OBD II Uart Hookup Guide

March 4, 2014

How to start working with the OBD-II Uart board.

My Drunk Kitchen Apron

September 5, 2013

A fun project that uses the LilyPad MP3 trigger. This apron will dispense helpful kitchen advice and humor from the host of My Drunk Kitchen, Hannah Harto!

RGB Panel Jumbotron

August 5, 2014

This tutorial will show you how to combine a webcam, a 32x32 RGB LED panel, and a Teensy 3.1 to stream video from the webcam, pixelate it, and display it on the LED panel - LIVE.

View more tutorial results...


Archived Tutorials 3 found

LCD 16x2 Add-On

"Hello, World!" Give your Inventor's Kit the ability to display all kinds of text and numbers.

HAB - Sensor System, Flight Computer, and Radio System

A break down of all the sensors chosen, the main PCB layout, and the high power radios and antennas used.

Laser Tape Measure Hacking

We tear apart a common laser tape measure. A good lesson in how to hack, how to document, and hitting walls.

Blog 859 found

New Product Friday: Ready, Aim, Fire!

July 12, 2013 38

Servos, a touch screen LCD, and more! Check out what's new for this week.

New Stuff and We're Closed!

March 27, 2009 4

We've got a new GPS buying guide, new MP3 board, serial multiplexer, SparkFun wrist belt, servo extension, iPhone LCD, low-cost DMM, a programmable oscillator, and lots of snow.

New Product Friday: Fil 'Er Up

July 11, 2014 7

Some more filaments and some retail kits. That's what we've got for this week.

UAVs and Giant Belt Buckles

December 11, 2008 3

New MP3 belt buckle tutorial and a handful of new products covering Uzebox open source game console, Arduino compatible Funnel I/O, Port-o-Rotary Blue (with Bluetooth? connection!), function generator and counter kits, and the new Arduino Ethernet Shield.

New Product Friday: A Display of Digital Goodness

March 15, 2013 11

We've got a new digital soldering station from Hakko, some books and LCD screens. Check them out!

New Product Friday: The Servo Trigger

March 27, 2015 9

This week we have the new Servo Trigger, the ESP8266 WiFi module, a new version of the Taz 3D Printer, and more!

Find a cold one

April 4, 2008 0

1, 2, 3,... 19 new things to post. We are really excited about so many of these, it's hard to choose where to start.

New Product Friday: Lulzbot

June 13, 2014 9

The future is here. This week we have a sound generator, 3D printer, and more!

Guest Blog: Circumventing Science Lab Budget Cuts with Open-Source Hardware

January 23, 2015 1

High-­school science teachers can radically reduce the cost of building up science labs while giving students opportunities to engage in genuine design processes by introducing them to open­-source hardware. A vast collection of free and pre­-designed low-­cost scientific tools are available, many of which can be printed on a open­-source 3­D printer, including the printer itself. Not only can students benefit from access to research grade equipment, there are ample opportunities for students to build on, improve, and customize scientific tools as part of their curriculum. In this way the number and value of the open­-source hardware designs can expand with student effort, enabling a powerful motivating factor for science education.

SparkFun in 3D

August 26, 2013 5

An update on our efforts to provide 3D models of popular SparkFun parts

The Return to Shenzhen - Part 3

June 15, 2011 46

SparkFun visits various factories and the electronics market in Shenzhen, China.

View more blog results...

Resources 26 found

Electronic Graphics Resources

February 6, 2014

Illustrator file with a variety of electronics images and icons. Made by Adam Meyer of bildr.org.

Alan Smith's Curriculum

February 6, 2014

An introduction to Arduino, microcontrollers and electrical circuits by Alan Smith.

Resistance Board

Lindsay Craig February 6, 2014

A project using e-textiles to show the concept of resistance in an intuitive manner.

Paper Circuits: Lotus Flower Pop Up Card

Angela Sheehan May 6, 2014

Templates used in the Have Fun with Paper Circuitry workshop at GESTEM on 5/9/14.

e-Textile Art Pin

Angela Sheehan June 11, 2014

Create a quick and easy piece of e-textile art using a LilyPad LED, Battery Holder, conductive thread, and coin cell battery.

RedBot & RedBoard with miniBloq

March 11, 2014

A step by step tutorial on how to use the drag and drop environment, miniBloq, to program SparkFun's RedBot and RedBoard.

Arduino Cheatsheet

August 19, 2014

This is an overview of the most important / commonly used Arduino commands.

e-Textile Mask Workshop

Angela Sheehan April 9, 2014

Presentation on sewing circuits and creating a light up mask used during Girl Scout Troop 73265's visit to SparkFun HQ.

Paper Circuits Pin

Angela Sheehan March 31, 2014

This quick craft project shows you how to create a circuit using copper tape instead of wire to light up an LED and make a wearable piece of e-craft art.

Getting Started with Scratch 1.4

April 26, 2014

This guide is a great place to start with Scratch.

Intro to Arduino

Lindsay Craig February 6, 2014

Here is a slide show presentation for introducing the Arduino SparkFun Inventor's Kit.

Processing Cheatsheet

July 8, 2014

We have compiled a quick reference list of all of the common commands we use for teaching Processing. This was created in Microsoft PowerPoint. The raw, ed

HotSheets: Processing

Derek Runberg April 18, 2014

Are you looking for a gradual and project based way to learn Processing. Check out this set of HotSheets that take you from 0 understanding to awesome!

Giant Soldering

Lindsay Craig February 6, 2014

Instructions on how to create a giant prop soldering iron to demonstrate PTH and SMD soldering techniques to large groups.

Giant Breadboard Poster

May 27, 2014

Looking to teach how breadboards work? Print this file out to a poster, laminate it, and use dry erase markers to illustrate the internal connections.

LilyPad and Sewable Circuits in Libraries

Angela Sheehan October 20, 2014

Tips for incorporating easy to use, scalable, and fun activities for library programs.

MakerScience and Arduino

April 7, 2014

Learn how to teach basic concepts of electricity and circuits, program a microcontroller, and integrate making, building, and inventing into your classroom

HotSheets: Scratch

Derek Runberg April 18, 2014

These HotSheets cover a few basic introductory exercises at learning how to use Scratch and the PicoBoard.

Paper Circuits: Light Up Valentine Pop Up Cards

Angela Sheehan March 27, 2014

Templates and slide presentation used in the Light Up Your Love with Paper Circuitry class on 2/12/14.

Arduino in a Nutshell

February 6, 2014

Beginner's guide to the Arduino Uno R3 by Prof. Jan Borchers.

View more resource results...

Classes 2 found

May 30, 2015

Costuming with Electronics: Beyond the Blink

Join us for an afternoon of electronic costuming. In this workshop we will be talking specifically about adding input to your wear…

July 6, 2015

Microcontrollers for Educators

Connecting the STEM Dots: Microprocessors and Electrical and Computer Engineering in the Classroom. Colorado State University Dep…

Articles 56 found

Wireless Buying Guide

Wireless Buying Guide When it comes to throwing data over the ether, there are a lot of options. If you’re confused about what wireless technology is best for your next project then keep on rea…

Arduino Buying Guide

Arduino Buying Guide Let’s face it, there are a lot of different Arduino boards out there. How do you decide which one you need for your project? With this table, you can not only compare featu…

XBee Buying Guide

XBee Buying Guide Welcome to the wireless world of XBee. Maybe you’ve heard of it, maybe you haven’t, either way you are in for a fun ride. XBees are tiny blue chips that can communicate …

GPS Buying Guide

GPS Buying Guide Above your head, right now, at an altitude of about 20,200 km there is a system of navigation satellites. There’s 35 of them, 24 active at any given time. It cost millions and …

Arduino Day 2015

On Arduino Day, starting at 12:01 a.m. MDT 3/28/2015 and running until 11:59:59 p.m. MDT 3/28/2015, we’re offering heavy discounts on some of our favorite Arduino and Arduino-compatible boards…

Accelerometer, Gyro and IMU Buying Guide

Accelerometer, Gyro and IMU Buying Guide Accelerometers and gyros are becoming increasingly popular in consumer electronics, so maybe it’s time you added them to your project! Scrolling through…

Retrosparktive

In just a few weeks, SparkFun will be vacating its offices at 6175 Longbow and moving on up to Dry Creek Parkway. For those of you that have been with us since our humble beginnings, this is a pretty …

Intel Professional Development Tour - 2015

SparkFun & Intel Professional Development Tour We invite you to join the tour Google+ community for extra content and to learn from others participants! Teaching and learning computat…

The SparkFun Dumpster Dive

The Dumpster Dive is sold out! Check back later for the next Dumpster Dive!

Holiday Shipping 2013

With the holidays rapidly approaching, we want to make sure you get your presents in time! Please refer to the below shipping methods and dates to make sure you get your order by Dec. 24th. Please …

Intel Professional Development Tour - 2014

SparkFun & Intel Professional Development Tour We invite you to join the tour Google+ community for extra content and to learn from others participants! Teaching and learning computat…

Donation Day

On Monday, May 20, 2013, SparkFun Electronics will donate 10% of all sales to the Electronic Frontier Foundation. The Electronic Frontier Foundation - or EFF - is one of the very few non-profit legal…

Free Shipping July 15 - July 19

Starting at 12:01:01 a.m. (MT) on Monday, July 15th until Friday, July 19th at 11:59:59 p.m. (MT), SparkFun will be offering free economy shipping on orders over $60 (before taxes). This applies t…

Nathan Seidle Bio

Nathan Seidle (pronounced sigh-dle) is the founder and CEO of SparkFun Electronics in Boulder, Colo. Nathan founded SparkFun in 2003 while an undergraduate student studying electrical engineering. …

Electrify Your Prom

If you’re in high school, you are undoubtedly starting to hear that mythical word echo through the hallways - yes, “prom season” is nearly upon us. Victorian-era fashion is so…

Pi Day 2015

You didn’t think we had forgotten about Pi Day did you? What’s Pi Day, you ask? Well, on March 14th (A.K.A. 3-14) it’s the day we celebrate mathematics, science and all things gee…

SIK Capstone Contest

Since we first started teaching with the SparkFun Inventor’s Kit (or SIK), we’ve seen some teachers and students do amazing things beyond what the kit teaches. In the SIK Capstone Co…

OSHW

Open Source Hardware If a device or project has this icon, it means the plans must: Contain editable source files Allow for modification No discrimination against groups (Flying Spaghetti Monster) …

Actobotics

Actobotics Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actob…

Tours

Ever wondered what sort of hijinks go on behind the scenes at SparkFun? Do you dream of seeing certain SparkFun folks in their natural habitat? Well you’re in luck, because we host public tours …

View more article results...