5,866 results for adxrs6

Lithium Ion Battery - 6Ah

PRT-13856
29.95
4
Teensy 3.6

DEV-14057
29.25
2
Teensy 3.6 (Headers)

DEV-14058
33.95
1
SparkFun Simultaneous RFID Reader - M6E Nano

SEN-14066
199.95
RCA Video Cable - 6'

CAB-11573
2.9500 0.95
6" Digital Calipers

TOL-10997
14.95
11
SparkFun 6 Degrees of Freedom Breakout - LSM6DS3

SEN-13339
9.95
SparkFun Cerberus USB Cable - 6ft

CAB-12016
6.97
11
Micro Gearmotor - 460 RPM (6-12V)

ROB-12429
12.95
Spring Terminals - PCB Mount (6-Pin)

PRT-08077
1.5
Jumper Wires Premium 6" Mixed Pack of 100

PRT-09194
24.95
3
Timing Pulley - Shaft Mount (10T; 6mm Bore)

ROB-12490
6.99
Coin Acceptor - Programmable (6 coin types)

COM-11636
44.95
3
Micro Gearmotor - 270 RPM (6-12V)

ROB-12125
12.95
1
Header - 6-pin Female (SMD, 0.1")

PRT-11544
0.95
SparkFun Hydra Power Cable - 6ft

CAB-11579
4.95
1
Resistor Network - 330 Ohm (6-pin bussed)

COM-10855
0.5
1
USB to RS232 Converter - 6ft

CAB-11304
15.95
3
Machine Screw - Socket Head (6-32 ; 9/16"; 25 pack)

ROB-12229
2.95
Machine Screw - Socket Head (6-32 ; 3/8"; 25 pack)

ROB-12423
2.5
Machine Screw - Socket Head (6-32 ; 5/8"; 25 pack)

ROB-12332
3.5
1
Standoff - Aluminum Threaded (6-32; 3/8", 4 Pack)

ROB-13133
1.29
Jumper Wire - 0.1", 6-pin, 6"

PRT-10371
1.5
Shift Register 8-Bit High-Power - TPIC6B595

COM-00734
2.25
Shaft - Solid (Stainless; 1/2"D x 6"L)

ROB-12326
4.79
Shaft - Solid (Stainless; 1/4"D x 6"L)

ROB-12427
2.09
Machine Screw - Socket Head (6-32 ; 5/16"; 25 pack)

ROB-12525
2.5
Machine Screw - Socket Head (6-32 ; 1"; 25 pack)

ROB-12528
4.5
Tube - Stainless (1"OD x 6.0"L x 0.88"ID)

ROB-12337
6.19
Serial Cable DB9 M/F - 6 Foot

CAB-00065
3.95
6-Pin Chassis Connector - Panel Mount (male and female)

PRT-11475
2.95
Jumper Wires - Connected 6" (F/F, 20 pack)

PRT-12796
1.95
1
Resistor Network - 10K Ohm (6-pin bussed)

COM-10856
0.5
1
Jumper Wires - Connected 6" (M/F, 20 pack)

PRT-12794
1.95
SparkFun USB Mini-B Cable - 6 Foot

CAB-11301
3.95
2
SparkFun 6 Degrees of Freedom Breakout - LSM303C

BOB-13303
14.95
Wild Thumper 6WD Chassis - Black (34:1 gear ratio)

ROB-11056
249.95
2
Bluetooth SMD Module - RN-41 (v6.15)

WRL-12575
25.95
3
Ribbon Crimp Connector - 6-pin (2x3, Female)

PRT-10651
0.35
Hub Arm - Double (6")

ROB-12413
12.99
Jumper Wires - Connected 6" (M/M, 20 pack)

PRT-12795
1.95
2
Aluminum Channel - 6.0"

ROB-12164
5.99
HDMI Cable - 6'

CAB-11572
4.95
1
Solar Panel - 6W

PRT-13783
59
1
Heavy Duty Wheel - 6"

ROB-12437
9.99
Polarized Connectors - Header (6-Pin)

PRT-08094
0.4500 0.05
Arduino Stackable Header - 6 Pin

PRT-09280
0.5
CAT 6 Cable - 3ft

CAB-08915
1.95

View more results...

Not finding what you're looking for? View Retired Products

LSM6DS3 Breakout Hookup Guide

August 13, 2015

A hookup guide for the LSM6DS3, which features a 3-axis accelerometer, 3-axis gyroscope, and FIFO buffer.

LSM303C 6DoF Hookup Guide

October 8, 2015

A basic guide to get started with the LSM303C 6 Degrees of Freedom Breakout.

LDK Experiment 6: Microcontroller Circuits

October 2, 2013

Learn how to build a simple microcontroller circuit using the pre-programmed LilyTiny Board

Dungeons and Dragons Dice Gauntlet

August 13, 2013

A playful, geeky tutorial for a leather bracer that uses a LilyPad Arduino, LilyPad accelerometer, and seven segment display to roll virtual 4, 6, 8, 10, 12, 20, and 100 side dice for gaming.

Sound Page Guide

May 22, 2015

How to use the Lilypad MP3 Player and some Bare Conductive Paint to make a fandom silhouette sound trigger page.

Importing Custom Images into Eagle

December 5, 2016

How to create custom graphics and import them into Eagle for silk, copper, etc.

SparkPunk Sequencer Hookup Guide

August 14, 2014

How to assemble and use the SparkPunk Sequencer kit.

Creating a Humidor Control Box

March 13, 2013

Because some of our boards need to be re-humidified after reflow, we decided to make our own humidor. This tutorial will focus on how to model a project in 3D and then fabricate it using a CNC routing machine.

SparkFun USB to serial UART Boards Hookup Guide

February 18, 2016

How to use the SparkFun FTDI based boards to program an Arduino and access another serial device over the hardware serial port, without unplugging anything!

Designing PCBs: Advanced SMD

December 10, 2012

Advanced Eagle layout for PCBs with SMD devices.

EL Wire Light-Up Dog Harness

October 30, 2015

Learn how to create a light-up dog harness using EL wire for when you need to take your four-legged friend for a walk in the dark.

Proto Pedal Chassis Hookup Guide

September 22, 2016

Prepare the Proto Pedal Chassis by drilling holes for controls and painting it.

PiRetrocade Assembly Guide

October 28, 2016

Build your very own retro gaming controller using the SparkFun PiRetrocade Kit.

Twinkling Trick or Treat Bag

October 2, 2014

Make a light up goodie bag with conductive thread, LEDs, and the LilyTwinkle!

How to Solder - Castellated Mounting Holes

May 12, 2015

Tutorial showing how to solder castellated holes (or castellations). This might come in handy if you need to solder a module or PCB to another PCB. These castellations are becoming popular with integrated WiFi and Bluetooth modules.

Shapeoko Assembly Guide

April 21, 2016

A guide for attaching the Stepoko Add-on kit to a Shapeoko Mechanical kit.

LDK Experiment 3: Buttons and Switches

October 2, 2013

An introduction to the use of LilyPad buttons and switches.

Light Up Silk Flower Corsage

April 20, 2015

Combine a silk flower with a built-in RGB LED and some LilyPad Switches to create a customizable accessory.

LilyPad Reed Switch Hookup guide

November 5, 2015

A guide to using the LilyPad Reed Switch breakout in your projects.

Benchtop Power Board Kit Hookup Guide

November 3, 2014

Need more power? This Benchtop ATX Power Supply Kit should help give you the boost you need to power those energy hungry projects.
New!

Hack Your Roshamglo Badge

March 12, 2017

Learn how to customize and program your Roshamglo badge.
New!

Simultaneous RFID Tag Reader Hookup Guide

February 23, 2017

A basic guide to getting started with the RFID Tag Reader breakout and how to read and write multiple RFID tags over multiple feet!

E-Textile Mask

September 19, 2014

Use LilyPad LEDs, a switched battery holder, and coin cell battery to make a fun light up mask for your next costume party.

SparkPunk Hookup Guide

June 12, 2014

How to assemble and modify the SparkPunk Sound Generator kit.

AT42QT1010 Capacitive Touch Breakout Hookup Guide

December 12, 2013

Learn how to use the simple AT24QT1010 Capacitive Touch Breakout.

LDK Experiment 2: Multiple LED Circuits

October 2, 2013

Design both parallel and series e-textile circuits with multiple LEDs!

Electronic E-craft Terrarium

January 21, 2016

A guest tutorial on an Electronic Terrarium from the Performative Sculpture class of Parsons DT.

Using GitHub to Share with SparkFun

August 19, 2013

A simple step-by-step tutorial to help you download files from SparkFun's GitHub site, make changes, and share the changes with SparkFun.

RETIRED Shapeoko Assembly Guide

November 20, 2015

A guide for attaching the Stepoko Add-on kit to a Shapeoko Mechanical kit.

EL Sequencer/Escudo Dos Hookup Guide

December 3, 2015

A basic guide to getting started with the SparkFun EL Sequencer.

microSD Sniffer Hookup Guide

August 4, 2015

A basic introduction to working with the microSD Sniffer.
New!

Photon Weather Shield Hookup Guide V11

March 2, 2017

Create Internet-connected weather projects with the SparkFun Weather Shield for the Photon.

LED Robot Pop Up Card

August 19, 2015

Craft a paper circuit pop up card with a cycling RGB LED, battery, and copper tape.
New!

Roshamglo Project: TV-B-Gone

March 12, 2017

Turn your Roshamglo board into a (nearly) universal TV power button.

Alternative Arduino Interfaces

July 29, 2014

We admit the Arduino IDE isn't for everyone. Here are some other options for programming your Arduino boards, including web interfaces and graphical programming languages.
New!

Getting Started With the Micro:bit

March 21, 2017

The micro:bit is a compact, powerful programming tool that requires no software installation. Read on to learn how to use it YOUR way!

Voltage, Current, Resistance, and Ohm's Law

February 6, 2013

Learn about Ohm's Law, one of the most fundamental equations in all electrical engineering.

Large Digit Driver Hookup Guide

June 25, 2015

Getting started guide for the Large Digit display driver board. This tutorial explains how to solder the module (backpack) onto the back of the large 7-segment LED display and run example code from an Arduino.

Mario the Magician's Magical Lapel Flower

May 23, 2013

A guest tutorial from the astonishingly talented Mario the Magician showing how to put together your own servo-controlled lapel flower.

Firefly Jar Assembly Guide

May 14, 2013

Make a soft circuit firefly jar with conductive thread, LEDs, and the LilyTwinkle!

LogicBlocks Experiment Guide

March 31, 2014

Experiments guide for the LogicBlocks kit. Build oscillators, latches, multiplexers and more with the LogicBlocks.

MicroView Digital Compass

October 24, 2016

Build a portable digital compass using the SparkFun MicroView and the MAG3110 Magnetometer Breakout.

Servo Trigger Hookup Guide

March 26, 2015

How to use the SparkFun Servo Trigger to control a vast array of Servo Motors, without any programming!

SD Cards and Writing Images

June 4, 2015

How to upload images to an SD card for Raspberry Pi, PCDuino, or your favorite SBC.

View more results...

Not finding what you're looking for? View Archived Tutorials

Eagle 6 Has Landed

January 23, 2012 46

The PCB layout tool we use called Eagle has undergone some helpful changes in v6.

Enginursday: Life Improvements with Arduino 1.6

March 12, 2015 16

The release of Arduino 1.6 has really improved my Arduino-programming life thanks to custom platform support, command line utilities and line numbers!

Welcome '::1:'

June 28, 2012 27

IPv6 Launch day has come and gone - where are we?

NYC Software Engineering Pilot (SEP) Program and SparkFun Electronics

October 7, 2013 0

One of the largest public school entities in the country kicked off a pilot program to integrate Software Engineering in grades 6 and 9 for 20 different schools. SparkFun was chosen to support their foray into embedded electronics, arduino, and eTextiles.

Arduino IDE 1.6 Released

February 9, 2015 8

The latest greatest IDE is now available for download.

Free EAGLE Webinars

February 11, 2013 29

Want to learn about EAGLE V6? Check out these webinars

Prepare for Episode 2 of "SparkFun Live"

December 23, 2013 2

Join us on January 6th for the next episode of "SparkFun Live."

SparkFun Gets a Sign!

September 30, 2009 24

It's the little things in life that get us excited! We get a new sign! Also, new flat 6DOF Razor, BeagleBoard, new EasyDriver version, custom serial LCDs, 1Watt high power modem (40 mile range!), Bluetooth dongle, microSD reader, air sensors, and microSD sniffer. !.

RIP Ralph Baer (3/8/1922-12/6/2014)

December 8, 2014 2

Ralph Baer, the "father of video games," passed away this weekend.

CES Day 1 Recap: Drone, Drone, Drone, DANCING ROBOT SPIDERS

January 7, 2015 0

A gaggle of SparkFun folks are here in Las Vegas for the 2015 International CES show–the biggest, best, and showiest show for all things electronic. Here’s the highlight reel of Tuesday, January 6.

Really Neat Projects and New Products

May 7, 2009 5

A stackable robot and a high altitude balloon, along with some new products.

According to Pete - June 6, 2011

June 6, 2011 62

You got questions about capacitors, we've got answers!

6ft 7-Segment Display

December 11, 2007 0

Tom Becker was nice enough to email us and comment on our <a href="http://www.sparkfun.com/commerce/present.php?p=GPSClock-1">12ft. GPS wall clock</a>. Then he put us to shame...

The Holy Grail of New Product Posts!

August 19, 2009 18

I think this is the most we have posted, ever? 25 new products!

The Fellowship of the Things: Episode 6 - Bluetooth Fitness Bracer

March 29, 2016 0

Using the Simblee LilyPad to make a fitness bracer that hooks up to your phone!

Welcome Back New Products!

March 3, 2009 5

New. Lots. XBee, linear pots, encoder, USB ANT Stick, a little LilyPad proto board, some AA batteries, and a new Rotary Phone using Bluetooth!

Everything Arduino: The Arduino Class, The EL Escudo and El Hexapado

July 17, 2009 4

EL Escudo new shield for Arduino. A new class for Monday and a few new user submitted projects.

Beerware and New Products

May 28, 2009 12

A neat little project on beer fermentation control along with new gyros, upgraded LilyPad, a motor driver shield for Arduino, and some new development boards.

SparkFun Heading to Maker Faire in New York

September 17, 2014 7

Join us for a new take on the famous SparkFun soldering booth!

Stiamo Andando a Roma!

September 23, 2014 7

SparkFun is making the trip to Italy for Maker Faire Rome!

Turkey Scratch -- Thanksgiving, Programming, and a 'lil Data

November 30, 2014 2

Happy Thanksgiving everyone! Check out this quick little hack using a standard temperature probe from my oven thermometer, our PicoBoard, and a little creative coding in Scratch!

Engineering as depicted in stock photos

March 24, 2016 26

Finding prosperity and personal fulfillment in the growing, fast-paced industry of drawing things in the air.

Why You Should De-Rate Capacitors

October 14, 2013 72

Why the voltage rating on capacitors matters and why you should derate them.

Come learn at SparkFun!

December 16, 2014 1

Be the master of your own electronics destiny with the help of our workshops!

Designing for Graceful Failure

December 15, 2014 45

Fault tolerance, graceful degradation - and failing in a not-so-painful way.

Google Ara Modular Smart Phone Developers Convention

May 1, 2014 16

The Ara Modular Smartphone Developers Conference was on April 15-16. We were there. This is what we learned.

Santa trap

December 24, 2014 1

A fun holiday project to try for anyone looking to catch Santa on Christmas!

It's Pi Day!

March 14, 2015 5

We've got some tasty deals to help you celebrate 3/14/15!

Highlights from Lindsay's Trip to the Lonestar State

May 15, 2013 0

Lindsay Levkoff, SparkFun Director of Education and vintage tchotchkes enthusiast, recaps her trip to SXSWedu!

Introducing the NERFCS Shipping System (Beta)

April 23, 2014 23

Introducing NERFCS - just in time for AVC. Are you up to the challenge?

Highlights from Lindsay's Trip to the Lonestar State

March 20, 2013 14

Lindsay Levkoff, SparkFun Director of Education and vintage tchotchkes enthusiast, recaps her trip to SXSWedu!

Rummage Giveaway Winners

August 12, 2014 4

Announcing the winners of the SparkFun Rummage Giveaway.

T³: Raspberry Pi and the Stereo Arcana

July 19, 2016 9

Building a set of speakers from goat skin and connecting them to a network media server

SparkFun and the Science Lounge

April 26, 2014 0

On the third Thursday of every month, the Denver Museum of Nature and Science hosts an evening event for adults in the area called, Science Lounge. Their programming features live entertainment, demonstrations, hands-on demos, and an evening filled with science, education, and exploration! Each month features a different theme. For April, the Science Lounge theme was “Electrify!” What a perfect match for us here at SparkFun!

Enginursday: Favorite Tools

December 11, 2014 21

Examining one of the categories that occupies significant space on my workbench: wire strippers.

Help Support the Open Hardware Summit

July 17, 2013 5

Help keep open hardware alive and well by sponsoring the OHS!

American Library Association Midwinter Meeting

January 29, 2015 1

SparkFun heads to Chicago this week to attend the American Library Association (ALA) Midwinter meeting.

Teaching Near and Far

December 24, 2014 3

A recap of our Let It Glow e-card crafting class and our trip to Maine teaching at Berwick Academy.

Outtakes From Our Trip to See the Girl Scouts

May 20, 2013 1

Raccoon on the run. The Camp Innisfree staff finds a coon in the dumpster.

Finding an Enclosure for Your Project

November 6, 2014 21

Good ways to find unique and affordable enclosures for your projects.

View more results...

Maker Certificate Program at Sonoma State University

October 26, 2016

Maker Certificate Program at Sonoma State University The Maker Certificate Program is a unique professional development and mentorship opportunity for educators to introduce making in Pre-K-16 lea…

Scratch with Data Logging

February 6, 2014

Workshop presentation and sample Scratch files from Jeff Branson’s workshop on Scratch Programming in a Science Classroom

Processing Cheatsheet

July 8, 2014

We have compiled a quick reference list of all of the common commands we use for teaching Processing. This was created in Microsoft PowerPoint. The raw, ed

RedBot & RedBoard with miniBloq

March 11, 2014

A step by step tutorial on how to use the drag and drop environment, miniBloq, to program SparkFun's RedBot and RedBoard.

Scratch Workshop Design Guide

February 3, 2015

A fantastic guide to teaching your own Scratch workshops and camp programs by the folks at ScratchEd. Click here to download.

How to use a multimeter

October 3, 2016

This is a hand-out developed from our popular "How to use a Multimeter" tutorial.

Nathan Seidle Bio

August 15, 2016

Nathan Seidle is the founder of SparkFun Electronics in Boulder, Colo. Nathan founded SparkFun in 2003 while an undergraduate student studying electrical engineering. Nathan opened SparkFun to ful…

SIK Teachers Guide

July 21, 2016

This is a summary of learning objectives, vocabulary, and key concepts that are used in each of the circuit examples in the SIK.

Introduction to Robotics using SparkFun RedBot Mainboard

January 15, 2015

Our team of educators piloted a class here at SparkFun in the Spring of 2014 introducing the RedBot Mainboard using the Dagu Multi Chassis platform. Here a

LilyPad With No Programming

February 6, 2014

Introductory handout covering sewing with conductive thread and how to avoid short circuits in e-textiles with LilyPad components.

PicoBoard LabPack Getting Started Guide

April 21, 2015

This is a hand-out illustrating how to get started using the PicoBoard and auxiliary sensors on ports A, B, C, and D. The LabPack comes complete with 10 Pi

How to Solder Comic

February 6, 2014

This comic describes how to do plated through hole soldering in an easy to understand visual format.

USB Buying Guide

January 1, 2012

USB Buying Guide One day in 1994, seven world-leading technology companies sat down and created a new standard for connecting computer peripherals. By “one day,” of course I mean, “…

Funding Sources for MakerSpaces in Libraries

April 21, 2015

Here is a short list of grants and funding sources for building out your own makerspace in your library or community center. Here are links to the raw sour

AVC 2016 Rules

September 15, 2016

AVC 2016 Rules The 2016 Autonomous Vehicle Competition has been broken into four competition categories: Autonomous Power Racing Series (A+PRS), Power Racing Series (PRS), Classic Autonomous Vehicle …

Processing the Danger Shield

February 6, 2014

This material teaches the creation and manipulation of basic shapes using Processing and SparkFun's Danger Shield.

Breaking the Rules: Hacking the Science Classroom with Arduino and Open-source Electronics

April 9, 2015

This workshop employs free Arduino software to explore classroom materials in an iterative, highly affordable framework. By combining everyday materials li

International Economy

October 1, 2013

International Economy SparkFun’s International Economy shipping option, also known as FedEx International Mail Service (FIMS) is carried by FedEx to your country, then usually handed off to the…

Arduino Buying Guide

March 3, 2017

Arduino Buying Guide Let’s face it, there are a lot of different Arduino boards out there. How do you decide which one you need for your project? With this table, you can not only compare featu…

Paper Circuit Cards

March 1, 2014

Have students build a simple circuit with copper tape, a coin cell battery, and an LED. This template can be extended to any number of other activities inv

Programming with Simon

February 6, 2014

This material shows a way to re-use our popular Simon game to teach programming after you have used it to teach soldering.

Subscribe to the SparkFun Newsletter

October 28, 2016

Sign up for the SparkFun E-mail Newsletter! Products, news and discounts - delivered straight to your inbox. What do you get with the SparkFun newsletter? Subscribers get to be among the first to …

Holiday Shipping 2016

December 8, 2016

Holiday Shipping 2016 With the holidays rapidly approaching, we want to make sure you get your orders on time. Please refer to the shipping methods and dates below to get your order by Decemb…

HotSheets: Scratch

April 18, 2014

These HotSheets cover a few basic introductory exercises at learning how to use Scratch and the PicoBoard.

LilyPad and Sewable Circuits in Libraries

October 20, 2014

Tips for incorporating easy to use, scalable, and fun activities for library programs.

SIK LCD Tutorial Activity

July 23, 2016

SIK LCD Tutorial simplifies the wiring and usage of the parallel LCD module that is included in the SIK.

NodeJS Testing Ground

February 2, 2016

Step 1: Setup Setup your RedBoard and breadboard as shown Step 2: Power Rails …

Getting Started with ArduBlock

February 11, 2017

Getting Started with ArduBlock ArduBlock is a programming environment designed to make physical computing with Arduino easier for beginners. Instead of writing code, worrying about syntax, and (mis)p…

Intro to Basic Electronics

February 6, 2014

Learn about breadboards, series and parallel circuits and basic sensors with this power point by Rick Anderson.

Microcontrollers for Educators 2015

August 5, 2015

Each summer, we teach a weeklong professional development workshop around using technologies such as Arduino, Processing, and electronics in the classroom.

Actobotics

January 15, 2014

Actobotics Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actob…

Dog Policy

January 24, 2014

Dog Policy Introduction This is the SparkFun Electronics Dog Policy. It is a living document used to govern the perk of bringing dogs to work as an employee of SparkFun. The canonical form of this d…

ASEE 2014 K-12 Workshop Materials

June 14, 2014

Encouraging Creativity, Gender Equity, and Arts in the STEM Classroom with Conductive Thread and LilyPad Arduino. Example Code Ardublock install – Unzip

Alan Smith's Curriculum

February 6, 2014

An introduction to Arduino, microcontrollers and electrical circuits by Alan Smith.

Serial LCD Quick Reference - Application Note

July 21, 2016

This is a quick reference to using any of the Serial-enabled LCD kits at SparkFun. It simplifies the command set into tables that are easy to follow.

Paper Circuits: Lotus Flower Pop Up Card

May 6, 2014

Templates used in the Have Fun with Paper Circuitry workshop at GESTEM on 5/9/14.

e-Textile Art Pin

June 11, 2014

Create a quick and easy piece of e-textile art using a LilyPad LED, Battery Holder, conductive thread, and coin cell battery.

Tours

September 22, 2014

Ever wondered what sort of hijinks go on behind the scenes at SparkFun? Do you dream of seeing certain SparkFun folks in their natural habitat? Well you’re in luck, because we host public tours …

EdWeek_Clouds

March 3, 2016

STEM Activity: Build an Indoor Cloud Display that Mimics the Weather! This engaging STEM activity motivates and intrigues students while taking…

SparkFun Inventor’s Kit Curriculum

February 6, 2014

The SIK binder is an entire curriculum for embedded electronics, centered around the SparkFun Inventor's Kit.

Physics and Open-Source Robotics - Activities for the classroom

April 9, 2015

Position, velocity, acceleration, torque, and rotation—these are all key concepts in both physics and robotics. Why not integrate these things together? We

ArduBlock: Graphical Programming Environment for Arduino

February 6, 2014

ArduBlock is a Scratch-like interface for Arduino and allows you to program Arduino using drag-and-drop blocks that free you of syntax errors.

Sylvia's Super Awesome Book Projects

November 19, 2014

Sylvia’s Super Awesome Arduino Book Projects The kit is now available! Guess what?! Super-Awesome Sylvia, star of Super-Awesome Sylvia’s Super-Awesome Maker Show, has a new book for you…

RedBot Library Quick Reference

June 26, 2016

This is a nice summary of the RedBot library. This is useful for introducing the RedBot commands to students.

MaKey MaKey Kit Librarian Reference Manual

June 7, 2016

The MaKey MaKey Kit: Librarian Reference Manual is a guide to using, managing, and troubleshooting the MaKey MaKey in your library.

Digital Sandbox Intro to CS Activities

July 29, 2016

This is a collection of activities that we created to introduce students to basic CS concepts using the Digital Sandbox.

View more results...