641 results for elastolite panel

Related Categories

ElastoLite
ELastoLite Panel - 2x2 inches - Orange

COM-11910
13.9500 $ 5.95
1
Panel Mount Nut - M12-0.75 (bag of 25)

PRT-13022
$ 0.95
1
LilyPad Rainbow LED Panel (5 strips of 7 colors)

DEV-11843
$ 24.95
1
Arcade Joystick

COM-09136
$ 19.95
1
Metal Pushbutton - Latching (16mm, Blue)

COM-11972
$ 4.95
2
Metal Pushbutton - Momentary (16mm, Green)

COM-11968
$ 4.95
3
Pushbutton Power Switch LV

ROB-08903
$ 5.95
1
ProtoSnap - LilyPad E-Sewing Kit

DEV-11032
$ 24.95
3
Pushbutton Power Switch SV

ROB-08904
$ 6.95
1
EL Wire - Starter Kit Retail

RTL-11421
$ 16.95
3
Display Module - 7" Touchscreen LCD

LCD-12725
$ 179.95
5
Flexible LED Matrix - WS2812B (8x32 Pixel)

COM-13304
$ 99.95
4
LCD Monitor - 7" HDMI

LCD-11612
$ 139.95
2
Thermal Printer

COM-10438
$ 49.95
2
Actobotics Kit - Nomad 4WD Off-Road Chassis

ROB-13141
$ 279.95
2
SparkFun Sunny Buddy - MPPT Solar Charger

PRT-12885
$ 24.95
3
Metal Pushbutton - Momentary (16mm, Red)

COM-11966
$ 4.95
3
RGB LED Panel - 32x32

COM-12584
$ 39.95
8
Momentary Button - Panel Mount (Green)

COM-11993
$ 0.95
1
Momentary Button - Panel Mount (White)

COM-11997
$ 0.95
1
LED Holder - 5mm (Chrome Finish)

COM-11147
$ 0.5
1
Rocker Switch - SPST (round)

COM-11138
$ 0.5
2
Toggle Switch and Cover - Illuminated (Red)

COM-11310
$ 2.95
3

LCD-13052
1
Metal Pushbutton - Latching (16mm, White)

COM-11975
$ 4.95
4
Shadow Chassis

ROB-13301
$ 12.95
7
Analog Panel Meter - 0 to 5 VDC

TOL-10285
$ 4.95
5
Momentary Button - Panel Mount (Black)

COM-11996
$ 0.95
2
SparkFun RedBot Basic Kit

ROB-13166
$ 84.95
5
Momentary Button - Panel Mount (Red)

COM-11992
$ 0.95
1
EL Panel - White (10x10cm)

COM-10799
$ 14.95
2
Metal Pushbutton - Latching (16mm, Green)

COM-11973
$ 4.95
2
EL Inverter - Battery Pack

COM-11222
$ 4.95
1

COM-11995
1
Audio Jack - 3.5mm (Panel Mount)

COM-11154
$ 0.5
1
ELastoLite Panel - 5x3 inches - Orange

COM-11905
$ 21.95
ELastoLite Panel - 2x2 inches - Green

COM-11909
13.9500 $ 9.77
ELastoLite Panel - 2x2 inches - Blue-Green

COM-11908
$ 13.95
Metal Pushbutton - Latching (16mm, Yellow)

COM-11974
$ 4.95
1
ELastoLite Inverter Connector - Green (INV133)

COM-11913
2.9500 $ 1.3
ELastoLite Contact Patch

COM-11919
0.9500 $ 0.67
ELastoLite Connector - T Juncture

COM-11921
2.5000 $ 1.75
ELastoLite INV133 Inverter

COM-11914
20.9500 $ 14.67
Solar Panel - 2W

PRT-13781
$ 29
Solar Panel - 6W

PRT-13783
$ 59
Solar Panel - 9W

PRT-13784
$ 89
Solar Panel - 3.5W

PRT-13782
$ 39
EL Panel - Blue (10x10cm)

COM-10798
$ 14.95

View more results...

Not finding what you're looking for? View Retired Products

ELastoLite Hookup Guide

November 14, 2013

Everything you need to setup a circuit using ELastoLite super flexible EL Panels from Oryon Technologies.

RGB Panel Jumbotron

August 5, 2014

This tutorial will show you how to combine a webcam, a 32x32 RGB LED panel, and a Teensy 3.1 to stream video from the webcam, pixelate it, and display it on the LED panel - LIVE.

ELasto-Nightlight

April 24, 2014

Fear the dark no longer with this ELastoLite nightlight.

RGB Panel Hookup Guide

December 12, 2013

Make bright, colorful displays using the 32x32 and 32x16 RGB LED panels. This hookup guide shows how to hook up these panels and control them with an Arduino.

Soil moisture-sensing by hacking a solar light

June 19, 2014

How to take a solar powered pathway light from a hardware store and make it into a crude soil moisture sensor.

Hackers in Residence: The Sound Visualizer Pt. 2

May 7, 2015

An addition to a previous project, this time using a PC and a custom Java app to create your own music visualizer using a RGB LED matrix.

Sunny Buddy Solar Charger V13 Hookup Guide

October 13, 2014

How to hookup the Sunny Buddy: a solar-powered, MPPT (peak-power tracking), LiPo battery charger.

Sunny Buddy Solar Charger Hookup Guide

April 11, 2014

How to hookup the Sunny Buddy: a solar-powered, MPPT (peak-power tracking), LiPo battery charger.

Photon Remote Temperature Sensor

March 1, 2016

Learn how to build your own Internet-connect, solar-powered temperature collection station using the Photon from Particle.

Creating a Humidor Control Box

March 13, 2013

Because some of our boards need to be re-humidified after reflow, we decided to make our own humidor. This tutorial will focus on how to model a project in 3D and then fabricate it using a CNC routing machine.

AT42QT1010 Capacitive Touch Breakout Hookup Guide

December 12, 2013

Learn how to use the simple AT24QT1010 Capacitive Touch Breakout.

MaKey MaKey Advanced Guide

February 6, 2014

Use Arduino to remap keys and program the MaKey MaKey.

Getting Started with the SparkFun Blynk Board

March 25, 2016

How to provision a Blynk Board - get it connected to Wi-Fi and Blynk, so you can start Blynking!

MYST Linking Book

March 18, 2014

Create your own Linking Book from the classic computer game, MYST

Bare Conductive Musical Painting

May 5, 2015

Learn how to make a musical painting using the Bare Conductive Touch Board and Conductive Paint.

How to Install and Setup EAGLE

September 5, 2013

Not just how to download and install EAGLE, but how to install the SparkFun EAGLE Libraries and scripts.

Weather Station Wirelessly Connected to Wunderground

April 11, 2014

Build your own open source, official Wunderground weather station that updates every 10 seconds over Wifi via an Electric Imp.

SAMD21 Mini/Dev Breakout Hookup Guide

November 12, 2015

An introduction to the Atmel ATSAMD21G18 microprocessor and our Mini and Pro R3 breakout boards. Level up your Arduino-skills with the powerful ARM Cortex M0+ processor.

Photon RedBoard Hookup Guide

August 27, 2015

Your guide to commissioning, tinkering, and programming the SparkFun Photon RedBoard.

Switch Basics

May 7, 2013

A tutorial on electronics most over-looked and under-appreciated component. The switch! Explaining the difference between momentary and maintained switches. And what all those acronyms (NO, NC, SPDT, SPST, ...) stand for.

Build an Auduino Step Sequencer

March 6, 2014

Make a Step Sequencer using an Arduino, the Auduino firmware, and a handful of hardware.

Hackers in Residence: The Sound Visualizer

March 23, 2015

A fun project that uses a Raspberry Pi and a custom Java app to create your own sound visualizer using a RGB LED matrix.

Interactive Hanging LED Array

April 10, 2014

Learn how we converted 72 lightbulbs into an interactive LED array for our conference room.

Decade Resistance Box Hookup Guide

December 4, 2014

How to assemble the decade resistance box, then use it as a design and measurement tool.

Rotary Switch Potentiometer Hookup Guide

April 30, 2015

How to use the Rotary Switch Potentiometer breakout board, with some sample applications.

The Uncertain 7-Cube

March 8, 2013

The Uncertain 7-Cube is a non-committal, less-than-helpful, but also entirely honest fortune teller. Simply ask it a yes or no question, give it a nudge, and the 7-Cube will dutifully inform you that it doesn’t have all the facts and doesn’t feel comfortable making a guess.

Getting Started with the Teensy

June 18, 2015

Basic intro to the Teensy line of products, with soldering and programming suggestions.

Light-Emitting Diodes (LEDs)

August 12, 2013

Learn the basics about LEDs as well as some more advanced topics to help you calculate requirements for projects containing many LEDs.

Photon Battery Shield Hookup Guide

July 2, 2015

The Photon Battery Shield has everything your Photon needs to run off, charge, and monitor a LiPo battery. Read through this hookup guide to get started using it.

Teensy Arduino Shield Adapter Hookup Guide

June 18, 2015

A basic introduction and assembly guide for the SparkFun Teensy Arduino Shield Adapter.

Das Blinken Top Hat

January 22, 2014

A top hat decked out with LED strips makes for a heck of a wedding gift.

Installing Arduino IDE

March 26, 2013

A step-by-step guide to installing and testing the Arduino software on Windows, Mac, and Linux.

Electronics Assembly

March 1, 2013

How SparkFun assembles SMD electronics.

Connector Basics

January 18, 2013

Connectors are a major source of confusion for people just beginning electronics. The number of different options, terms, and names of connectors can make selecting one, or finding the one you need, daunting. This article will help you get a jump on the world of connectors.

Nest Protect Teardown

January 15, 2014

See the inner-workings of the new Nest Protect in this SparkFun Teardown.

Teardown: DDC Mobile X900

June 3, 2014

Nate picked up a bricktastic phone in China. Let's take it apart!!!

Constant Innovation in Quality Control

December 11, 2013

In this article, we share our recent advancements in quality control. Every new product we design and manufacture here at SparkFun gets a custom testing apparatus that is designed and built in house. Along with making our tests more thorough, we have also made them more efficient and robust.

Galileo Getting Started Guide

January 23, 2014

An introduction to the Arduino/Intel Galileo, and how to begin using the nifty x86, 400MHz Arduino.

Getting Started with OBD-II

October 8, 2015

A general guide to the OBD-II protocols used for communication in automotive and industrial applications.

SD Cards and Writing Images

June 4, 2015

How to upload images to an SD card for Raspberry Pi, PCDuino, or your favorite SBC.

MIDI Shield Hookup Guide

October 8, 2015

How to assemble the SparkFun MIDI Shield, plus several example projects.

Spectrum Shield Hookup Guide

March 24, 2015

Want your project to react to music? Then the SparkFun Spectrum Shield is the product for you! Get going in no time with this Hookup Guide.

Tiny AVR Programmer Hookup Guide

October 28, 2013

A how-to on the Tiny AVR Programmer. How to install drivers, hook it up, and program your favorite Tiny AVRs using AVRDUDE!

pcDuino Crowdsource Kiosk

January 9, 2014

Getting People to do your job for you (badly) with some chocolate and a pcDuino!

Dot/Bar Display Driver Hookup Guide

January 16, 2014

How to hook up the LM3914 or LM3916 to drive a 10-LED display with a lone analog signal.

MaKey MaKey Quickstart Guide

February 6, 2014

Be stoked! The world is your construction kit. How to turn everyday objects into computer inputs with the MaKey MaKey.

SIK Experiment Guide for the Arduino 101/Genuino 101 Board

April 28, 2016

This guide contains all the information you will need to explore the 21 circuits of the SparkFun Inventor's Kit for the Arduino 101/Genuino 101 Board.

View more results...

Not finding what you're looking for? View Archived Tutorials

ElectriCute - Elastolite Tattoo

February 10, 2014 7

Check out today's edition of ElectriCute to build a light-up tattoo made with Elastolite.

It's Project Time: The Glowing ELastoLite Rabbit of Glory

April 28, 2014 2

I wrote a tutorial about how to make a nightlight with ELastoLite. It's pretty ok, so check it out. DO IT.

New Product Friday: Elastolite Brigade

May 2, 2014 4

New ElastoLite Kits and an awesome new single board computer.

Engineering Roundtable - ELastoLite Captain America Shield

April 2, 2014 10

Nick Poole shows us how to make a Captain America shield with ELastoLite!

Build Your Own RGB Panel Jumbotron

August 6, 2014 2

Check out this new tutorial and learn how to build your own jumbotron!

Jeff Branson at Engadget Expand

November 13, 2013 7

At last weekend's Engadget Expand conference, our Educational Outreach Coordinator joined a panel about computer science in education.

E-Textiles Sale Reminder

September 30, 2014 0

Have you picked up the parts for your next wearables project?

Engineering Roundtable - Burning Man Edition

September 10, 2013 19

Engineer Chris went to Burning Man, and needed some solar power for his project. Thus, a Roundtable was born.

OSHW DC Meetup and Survey

April 10, 2012 73

Take the Open Source Hardware survey and come say hi at our booth in DC.

Designing a control system for a robot battle arena

July 9, 2015 12

This post highlights my method of creating the control system for our AVC battle arena.

Learn How to Stencil!

October 18, 2010 23

We're offering a new class - solder stenciling!

Check out the Lumapad!

March 11, 2013 13

Check out the open source photo light you can control with your phone.

New Product Friday: Your Parts Connection

April 13, 2012 39

Another big week for new products. Check out all the connectors, plugs, and tools we have for this week.

New Product Friday: Time for New Stuff

September 21, 2012 10

We've got a few new products this week, so check out the goods and see if there's anything you can use.

Soldering Stenciling Class Reminder

November 14, 2011 15

We have a solder stenciling class coming up this week!

A Few New Classes

March 21, 2011 21

We have a few classes to announce - mainly the popular Solder Stenciling class.

B-Squares

May 9, 2011 32

Check out another awesome KickStarter project!

Friday Product Post: New Year, New Products

January 8, 2016 8

New solar panels, Arduinos, and the official release of the Qduino Mini! Woo-Hoo!

New Product Friday: Your Parts Connection

October 5, 2012 21

The shipments are coming in and we're starting to get a lot new products. Check out what we've got for this week!

Solar Economics

July 1, 2008 36

Does it make sense to install a solar power system? Maybe yes!

Enginursday: KiCad and Open-Source Design

February 25, 2016 22

The process of using open-source designs to get to a final product, featuring KiCad, PJRC, and Advanced Circuits.

New Product Friday: A Touching Gesture

November 7, 2014 5

A cool new sensor, some revisions, and other great stuff. Check out what's new.

Simple Solar Power

May 2, 2013 29

Collecting the power from the sun is not difficult, but budgeting the total power consumption for you system will lead to many design choices.

A Brilliant New Product Post

August 26, 2011 26

It's time to brighten your day with a glowing line-up of new products.

A Bevy of New Products

June 4, 2010 3

What a better way to celebrate the start of the weekend than with a handful of new products!

Battery vs. Water Tank

October 23, 2008 32

How much water does it take to replace a battery?

New Product Friday: Benjamin Button

August 3, 2012 34

We got a new shipment of stuff for this week that includes some swag, some new Arduino boards, and a couple of revisions.

New Product Friday: Sassy Chassis

May 29, 2015 4

New Products! Today we have a slick new chassis, motors, and an awesome preorder for Particle's new Photon IoT board.

Open Hardware Summit 2012

September 11, 2012 8

Three cheers for SparkFun Engineer Mike Hord, who's heading to New York later this month to speak at the annual summit!

Ponoko has the lasers, We've got the guts, You could win the glory!

July 9, 2010 9

GeekDad, Ponoko and SparkFun are teaming up for a unique design competition with a very impressive prize.

New Product Post Friday Giveaway!

May 13, 2011 74

For the first time, we're giving away free stuff to our loyal product post video fans!

Welcoming Our New Robot Friends :: Part II

January 2, 2013 88

The second installment of a somewhat long story about the recent additions to our growing family of manufacturing equipment.

New Product Friday: Product Power!

September 28, 2012 11

Friday means new products here at SparkFun. We've got a few things, so let's talk about what we've got!

The T in IT stands for Toys

September 3, 2009 17

A look at some of the gear used by the SparkFun IT department to keep the website and SparkFun HQ rolling along

Your Friday New Product Wrap-Up

June 24, 2011 33

This Friday, we're coming to your aid with more new products!

iFOB This

May 20, 2009 8

Active RFID to open your car doors. Maps to Maker Faire and presentation times. And a bunch of new stuff!

New Products and Mechan-O-Pong!

August 19, 2011 34

Another New Friday Product Post with Mechan-O-Pong!

Teaching LilyPad at Fashion Institute of Technology

July 2, 2014 1

Angela from the Education Department visited F.I.T's Digital Spa Maker Camp to present a workshop on LilyPad and e-textiles.

Enginursday: EnLightningment

August 7, 2014 2

In this week's Enginursday post, Joel discusses how he went about making a control box for a large scale interactive EL wire art installation.

New Product Friday: Year in Review

December 30, 2011 18

This is the last New Product Post of the year and although we only have a few products to talk about this week, it's been a good year.

View more results...

SXSWedu Panel - Build, Create, and Hack: Bringing STE(A)M into K-12

March 4, 2014

These are the materials presented at the SXSWedu Panel Presentation on March 4, 2014.

We didn't find any events that matched elastolite panel. Would you like to Browse Classes?

ELastoLite Tutorial Bill of Materials

Pearce 7 items

A bill of materials to make a simple 3x5" lamp and inverter...

Elastolite Tattoo

Dia 10 items

Everything you’ll need to recreate the illuminated tattoo...

Captain America Shield

NPoole 8 items

Elastolite parts from the glowing Captain America shield build.

XMas

Member #452025 9 items

Materials to make glowing gloves

My KSP Control Panel Project Passives

Member #527692 13 items

After playing Kerbal Space Program by some time, and viewing...

flexible rgb led panel text display kit

matt pinner 5 items

yes. it worked with a 3.7 v battery (no boost) and 3.3v data...

Dragon*Con Swag

Dia 94 items

Cool products to demo/distribute at con. List is missing...

Panel Mounted SD-Card Socket

dslocum items

The title pretty much says it. Terminate with 0.1" SIP or...

My KSP Control Panel Project Actives

Member #527692 2 items

This is the active part companion of the other KSP project...

View more results...