avatar

cfaulkingham

Member Since: December 30, 2009

Country: United States

  • Product DEV-11712 | about a year ago

    When I first plugged it into the TV it didn’t have the overscan issue. Only when I applied the “dvi fix” . The monitor that didn’t work as best I can tell has a native resolution of 1280 x 1024.

  • Product DEV-11712 | about a year ago

    Well it seems like it’s hit or mis with the DVI to HDMI patch. I applied the patch and it didn’t work for me. I have an older monitor and that probably has a lot to do with it. However the same monitor works for my RaspberryPI’s. The fix also made the settings for wacky when connecting it to the TV It’s now spilling over both on the height and the width.

  • Product DEV-11712 | about a year ago

    There is an FPGA sheild for the Arduino. See, https://tindie.com/shops/majolsurf/amani-f2-fpga-shield/

  • Product DEV-11712 | about a year ago

    Same here!

No public wish lists :(