Forgot your password?
No account? Register one!
January 2, 2010
Product KIT-11042 |
about 11 months ago
Is there any reason this won’t work?
To use the double-throw capability of the relay, I soldered tabs to the three high-current pins of the relay, sandwiched between the PC board and the relay body, and hanging out over the sides of the PC board. I will solder or screw 14ga. stranded wires to the tabs.
I want to control a 220v, low current load. It is the control circuit for a gas-fired spa heater.
No public wish lists :(