Member #1013950

Member Since: June 7, 2017

Country: United States

  • If you are going crazy with using 3 or more channels. Don't worry, I got you. If the serial console shows just some of the channels and all the wiring on your Arduino is correct, probably your problem will be solved just below. I came up with a nice reception of 6 channels by using the function this way: pulseIn(13, HIGH); By deleting this, by default Arduino uses a 1sec timeout. (very annoying but useful & gives you an idea...). With this info in mind and this reference https://www.arduino.cc/en/Reference/PulseIn I bet you can solve the problem.

    Hint: Its something involved with the timeout and PWM generated with your reciver :D

    Another solution is using @JamestheQuack method.(scroll down , don't be lazy)

  • Look my recent comment, it appeals your problem !!

No public wish lists :(