avatar

atkulp

Member Since: January 4, 2010

Country: United States

Profile

Bio

Microsoft Visual C# MVP

Programming Languages

C#, VB

Websites

http://www.ariankulp.com

  • I hate responding to a post from eight months ago, and I’m a bit disheartened by the lack of response, but… I’m experiencing the exact same issue. In my case, I’m connecting it to a Nano and bridging pins between the Nano and Weather Shield. I have the SDA, SCL connected to the matching pins on the Nano, and I’ve connected Batt level (2) and light (1) to two analog pins (using LIGHT and BATT constants). I’ve also connected 3V3 directly to another analog pin on the Nano and specified the pin number as REFERENCE_3V3. For good measure, I connected GND of the Nano to a GND on the Weather Shield. No errors, but my output matches parent post: all negative numbers, nearly identical. HELP!

  • Sorry to add this months after your message, but can you elaborate on how you are using this? Are you just using the Arduino C++ code with the iPhone code or something else?

No public wish lists :(