webstdave

Member Since: January 4, 2010

Country: United States

  • Product WRL-10505 | about 2 years ago

    Does anyone know what the PGM enable pads on the bottom of the board are for. My guess is they are some sort of program enable feature and if so does anyone know how to use this feature?

    UPDATE: I believe that my assumption was correct, if those pads are jumpered together, the board may be programmed via UART0. I will update again and let everyone know if I was able to update the firmware with AP mode via this method.

  • Product ROB-10735 | about 2 years ago

    Will Sparkfun be using the A4988 on the next batch of these boards?

  • Product SEN-09623 | about 4 years ago

    Thank you so much for the quick response!

  • Product SEN-09623 | about 4 years ago

    Does anyone have the sample code that sparkfun provided for the previous revision of this part with the 16mhz clock?

No public wish lists :(