Member #103262

Member Since: January 5, 2010

Country: Canada

  • Product WRL-12580 | about 4 months ago

    Hello all; I am experiencing an interesting issue…I am not able to figure out whether this due to my code or a hardware problem. I was hoping to gauge you all to see if anyone has experienced this. Although the documentation states that such a state is NOT possible, I have experienced it. I have purchased over 20 of these for a project and I have experienced this with 3 of them (although I have not tested each one extensively).

    ISSUE: The module is connected (green led - solid) and then all of a sudden I get the following: BOTH the RED led (fast blink) and GREEN (solid) led are lit up at the same time. This suggests the module is both in command mode and connected at the same time. The documentation states such a state is not possible.

    Suggestions? Thanks.

  • Product WRL-12582 | about 4 months ago

    Hello all; I am experiencing an interesting issue…I am not able to figure out whether this due to my code or a hardware problem. I was hoping to gauge you all to see if anyone has experienced this. Although the documentation states that such a state is NOT possible, I have experienced it. I have purchased over 20 of these for a project and I have experienced this with 3 of them (although I have not tested each one extensively).

    ISSUE: The module is connected (green led - solid) and then all of a sudden I get the following: BOTH the RED led (fast blink) and GREEN (solid) led are lit up at the same time. This suggests the module is both in command mode and connected at the same time. The documentation states such a state is not possible.

    Suggestions? Thanks.

No public wish lists :(