Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.
Track My Order
Frequently Asked Questions
International Shipping Info
Mon-Fri, 9am to 12pm and
1pm to 5pm U.S. Mountain Time:
Chat With Us
July 16, 2017
about 3 years ago
I have connected the IMU to the FTDI breakout 3.3V and then plugged via usb to my pc.
Then i used a serial terminal (both CoolTerm and the Arduino IDE terminal) to test the example firmware
Although the firmware loaded alright showing a menu,when i pressed various buttons i received no response.
More specifically the TX LED on the FTDI lit up but the receiving LED on the IMU did not light up.
Also i tried the AHRS/Head-tracker Tutorial but when trying to upload the arduino sketches got the following error:
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
Any ideas how to fix this?
No public wish lists :(