Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.

Member #106574

Member Since: January 6, 2010

Country: United States




  • As stated here the chip doesn't package the communications, so you can treat this as simply a wire in your I²C bus (albeit one that needs to terminate in another chip before it can be used for interfacing to other I²C devices). You can also do multiple drops from the cable side, if that works better for your application. If you have drops off the differential cable, they need to not be terminated, so just remove the termination resistors from this board.

  • Typo in the part number on the features tab, FYI.

  • Will the pouch not seal well if you just use a hot air gun (and possibly a squeegee/spatula)? I would think it would make the process a bit easier. Working from one side to another could probably prevent most bubbles.

  • Or, you know, http://www.adafruit.com/products/1150

No public wish lists :(