Said

Member Since: January 11, 2010

Country: United States

  • Product GPS-09171 | about 4 years ago

    Ok. Got it working. TX-I (on the gps chip) => Rx (on the usb breakout board) and TX-0 => rx. Gnd to Grn and 3.3v to 3.3v of course.

  • Product GPS-09171 | about 4 years ago

    Hi. I connected this chip via the breakthrough board to my laptop. the led lights up and stays on. I cannot connect to this device in GpsViewer. I saw t flashing at some time but now it just stays on. I changed TX-RX pins on the USB board. no change. by the way, which rx-tx pins to use on the breakthrough board? there are 2 rx/tx pins. RX-I/TX-0. RX-D/TX-D???
    Thanks.

No public wish lists :(