HombreMecatronico

Member Since: January 26, 2010

Country: United States

  • Product WRL-09367 | about 4 years ago

    You can find an arduino sketch (WiflyTerm 1.0) that gives you access to the RN-131G through the arduino’s serial port.
    Just open a Hyperterminal (not the arduino serial monitor) and configure the USB serial port at 9600,N,8,1 with no flow control, and type $$$ to enter the configuration console.
    You can configure unconnected wifly modules and save the configuration in NV memory as the default, so the module connects automatically and this program is no longer needed. With this program you don’t need to change your network SSID/encription to configure the module.
    The blog entry in spanish (sorry): http://hombremecatronico.es/?p=247
    Or just get the Wiflyterm 1.0 at: http://hombremecatronico.es/wordpress/wp-content/uploads/2010/01/wiflyterm.zip
    Sincerely: El Hombre Mecatr?nico

No public wish lists :(