×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

MYK

Member Since: February 10, 2010

Country: United States

  • i am a scientist with a limited knowledge about electronics.
    i need to log data from sensors capable of providing serial output to a common PC rs-232c serial port (Rx, Tx and ground pins are the only ones used, and Tx is not necessary for logging). also i would like to have time stamps for incoming lines of data
    is that wonderful thing - Logomatic v2 Serial SD Datalogger - capable of doing that or does it require any modifications?
    actually i need multichannel serial logger to log up to 16 serial sensors connected sumultaneously. this would be an ideal solution of course.
    and this task is performed in a power-limited environment - deployment of a submersible instrument under water for periods from couple hours up to a week, so all the mechanical and electronical devices used are powered from batteries.

No public wish lists :(