MilesTag

• News - November Caption Contest … | about 3 months ago

  Acceptance Post: Thanks guys! Since it IS “The Season”… I’ll just add something to it and pass it on to a more needy nerd, lol. I’m sure I can find a local electronics class or Boy Scout troop that will put it to good use. Merry Christmas!

  Jim

• News - November Caption Contest | about 4 months ago

  “You were right. This is SO much easier than replacing those stupid flourescent bulbs!”

• News - November Caption Contest | about 4 months ago

  Let me count the safety violations…. (OSHA?)

• News - November Caption Contest | about 4 months ago

  How many lightbulbs does it take to screw four engineers out of their lunch break.

• News - November Caption Contest | about 4 months ago

  I said “Bud Lite”.

• Product BOB-11820 | about 8 months ago

  Finally got this LED working with a PIC18F running at 8MHz. But you don’t have many clock cycles left over to play with, since each instruction takes 0.5uS and the recommended bit period is just 1.25uS (T-Hi + T-Lo). One nice feature is that the data stays latched (even with power off I believe) so you don’t have to constantly refresh the data.

• Product COM-11759 | about 8 months ago

  No, there is no learning function.

• Product COM-11759 | about 8 months ago

  Yes, it appears to be NEC format. Sync (Header) followed by 32 bits. The first 8 bits are the “Custom Code”; followed by 8 bits “Inverted Custom Code”; the third 8 bits are the “Data Code”; followed by the 8 bits “Inverted Data Code”.

  Infrared Protocols PDF

• Product COM-11759 | about 8 months ago

  It also works fine with a 40KHz receiver and a 56KHz receiver.

• Product COM-11759 | about 8 months ago

  If you continue holding a button, it will send FFFFFFFF repeatedly until you release. There is no learning capability. All the codes posted below by Jamo appear to be correct. BTW - In PICBASIC you can just use the PULSIN command to read the code.

No public wish lists :(