Rampagesmr

Member Since: February 18, 2010

Country: United States

  • Product SEN-09334 | about 4 years ago

    Unfortunately, 4D System’s ?CAM-TTL camera module will also be discontinued. When I emailed 4D Systems about Comedia’s Serial JPEG camera being discountinued, I told them it is because the Omnivision OV528 chip on the modules are discontinued. Omnivision upgraded their chip to the OV529 chip. Unfortunately, they are not the same footprint. The new one is a BGA! So both Comedia and 4D Systems must redesign their Serial Camera Modules. There is no word from both Comedia and 4D Systems when they plan to release a replacement module. 4D Systems told me that they are looking for an alternative, but may use the OV529 after all. IMHO, both Comedia and 4D Systems should have already designed their replacement camera module because the discontinuation of the OV528 has been known for about a year now.

  • Product COM-09308 | about 4 years ago

    Does anyone have a mechanical drawing of this trackball so I can use this in my project? Kinda difficult to make a case for something without one.

  • Product COM-09320 | about 4 years ago

    Pearce: That’s exactly the switch that is underneath the trackball.
    No it is not. The footprint of the COM-08720 is much bigger than the footprint seen in the Eagle PCB Layout program.
    You need to use a tactile button such as the following:
    EVQ-PQMB55
    http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=P8091SCT-ND

No public wish lists :(